Specifications

28
Using BIOS
Standard CMOS Setup
This option displays basic information about your system.
Date Mon 01/01/2007
Time 00:00:48
f
Help Item
f
f
f
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
User [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Date.
IDE BusMaster Enabled
Standard CMOS Setup
Date & Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
For the purpose of better product maintenance, the manufacture reserves
the right to change the BIOS items presented in this manual. The BIOS
setup screens shown in this chapter are for reference only and may differ
from the actual BIOS. Please visit the manufacture’s website for updated
manual.
Primary IDE Master Not Detected
Primary IDE Slave Not Detected
SATA1 Not Detected
SATA2 Not Detected
SATA3 Not Detected
f
f
Primary IDE Master
f
Your computer has one IDE channel which can be installed with one or two devices
(Master and Slave). In addition, this motherboard supports four SATA channels and
each channel allows one SATA device to be installed. Use these items to configure
each device on the IDE channel.
CMOS Setup Utility- Copyright (C) 1985-2005, American Megatrends, Inc.
Primary IDE Master
Primary IDE Master
LBA/Large Mode Auto
Block (Multi-Sector Transfer Auto
PIO Mode Auto
DMA Mode Auto
S.M.A.R.T. Auto
32Bit Data Transfer Disabled
Help Item
Disabled: Disables
LBA Mode
Auto: Enables LBA
Mode if the device
supports it and the
device is not already
formatted with LBA
Mode disabled.
Device : Not Detected
mnlk
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Optimized Defaults
F1: General Help
mnlk
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Optimized Defaults
F1: General Help