ECS ELITEGROUP User Guide For Smart Watch WA068CR
Regulatory Compliance Information FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Canadian Department of Communications Compliance Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This device complies with Industry Canada licence-exempt RSS standard(s).
your local waste collection center or the point of purchase of this product.
Attention: Teachers, Parents and Adult Supervisors This product is an educational tool designed for school children, ages 6 and up. There must be supervision by an adult on school children under 10 when using this laptop. It is a must to have a thorough explanation to students on safe and proper handling of the laptop, power supply, battery pack, and power cord.
It is recommended that students should take a 5 minute break every 30 minutes of use.
Safety Precautions The following are lists of precautionary measures the students must understand before using this computer inside the classroom or home environment: 1. 2. 3. 4. 5. 6. Do not place near the fire or other sources of heat. Do not expose to magnetic fields. Do not expose to direct sunlight. Do not expose to rain or moisture. Do not place heavy objects to add heavy pressure on the computer. Do not drop the computer. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
Contents 1. Checking and inspecting.............................................................. 1 Package contents ................................................................................................................. 1 Layout ...................................................................................................................................... 2 Views ............................................................................................................................
User Manual.............................................................................................................22 My settings ...........................................................................................................................23 Sync .............................................................................................................................23 My watch info.........................................................................................................
1. Checking and inspecting Package contents Carefully unpack your box and take out the items listed as below.
Layout Views z Front The front panel is the screen that displays information and can be wake up from sleeping by double tapping.
z Back On the back of your smart watch, there is the pogo pin connector that allows you to connect the provided magnetic charging cable in right direction. If you want to turn off this watch, just short circuit the two pogo pins.
2. Using your smart watch Connecting to your tablet For the first time using this product, the smart watch is in lock mode. Double tap the front screen, you shall see the screen similar to the one shown below. Where the string “EB:CD:93:51:20:C0” is the assigned Bluetooth address for your watch (the actual address may vary from case to case ). From here, you need to pair it with your tablet through Bluetooth to unlock it. To establish the Bluetooth connection, do the following steps: 1.
2. Your tablet will automatically start detecting and adding it as an available device. Click it from the available device list to pair with it. When it is done, your watch shall be added to the paired devices list. 3. Double tap your watch on the front panel, and you shall see the image similar to the one shown below. Your smart watch goes into sleep mode if no operation for 7 seconds. You can double tap the display to wake it up.
Watch modes From the sleep mode, you can switch to and view different modes in sequential order by double-tapping the display, where the modes are: 1. Time mode To set time, please see page 8 for detail. 2. Pedo mode Please see page 17 for detail. 3. Cal mode (optional) 4. Mil mode (optional) For how to set the modes, please see page 25..
3. Software The software using here is the one called My Square, the icon of which is as shown on the left. To using this software, you shall: 1. Turn on the the Bluetooth and WiFi features on your student tablet. 2. Make sure your WiFi connection is established. 3. Tap the My Square icon to activate the software. 4. Enter your school ID and password. 5. Once your table and smart watch are paired up, the main page will be displayed as the one shown below.
The software comes with following features: My body My Memo (see page 9) (see page 16) My Helper My settings (see page 19 ) (see page 22) Click on the desire option to view and set the information.
My body This is where to set your Gender and Pet, and enter information including your height, weight, age and your pet’s nickname. Settings page When this is your first time accessing “My Body“ page, this page will show up and guide you through the initial settings. Base on the gender settings, the system will prepare the default pedometer target steps. After you complete the settings, you will see you’re My Body page as shown below.
This page consists of fields as shown below: No. 1 2 3 4 5 Icons Description Sleep: shows your sleep duration and sleep quality. (See page 11 for detail) Pedometer: shows your pedometer performance and records such as steps, calories burned and distance. (See page 12 for detail) Sedentariness: allows you to set a timeout after which the system will remind you if it detects no movement from you before the timeout.
Sleep Your smart watch can tracks your sleeping activity, and can send the related data to your tablet through the Bluetooth connection. After analyzing the data, the result is displayed in this page. Slide to the second page, you can view the tendency of your sleep status as shown below.
Pedometer This page can graphically display the records synchronized from your smart watch. Slide to the second page, you can view the statics of your performance trend over time as shown below.
In this page “Trends”, the upper right corner is the target set by the system based on your body settings. If you want to change it, just click there to open the dialog box as shown below. If your gender is set to Boy, you can manually modify it to any from 10000 to 16000; If Girl, any from 8000 to 14000. After modification, just tap OK to close the dialog box.
You can enable or disable the reminder of sedentariness. If enable, you can further set: z Reminder time (in minutes): the options are 40,50,60(default),70,80,90,100,110, and 120. z Sedentariness observation period: the options are 07:00~22:00 and 16:00~20:00 (default).
You can view your sedentariness tendency in this summary page.
z Sedentariness notification When a sedentariness notification is made to your smart watch, it will show as shown below: Pets By a tap on the pet, you can open a summary for your yesterday performance similar to the one shown on the left. The summary shows your body status of yesterday and the rewards given based on your performance.
My Memo You can set your memo and let the system notifies you about the memo at your designated time. The notification will be made through the watch and also the tablet. z blackboard On the left area of this page, it is the blackboard that allows users to scratch arbitrarily and have no characters limitation. z Memo area On the right hand side, the area will display all memos, scheduled in the past and for the future, and you can slide up and down to view the memos scheduled.
You can click on one of the following icons to show specific memo. Reminder Test Homework Activity Others Adding a new memo and its notification 1. Tap “ ” that can be found on the upper right corner. 2. Enter your desired event name, memo type, event start time, notification time, event description.
The total number of characters allowed in “Event Description” is 120. 3. Choose “Save”. The new memo will be added to and displayed in My Memo. 4. Tap to go back to My Memo page. Notifications When a notification is made to your smart watch, it will show the corresponding icon to let you know the type of the notification. When at the same time there are two or more notifications of the same type, a “+” will be added to the upper right comer of the icon.
My Helper Find your watch After having your watch paired with your tablet, it will be appointed one unique MAC address. With this MAC address, you are able to locate your watch using your tablet. Tap the watch image on your tablet to start searching. Once the tablet locates the watch, it will vibrate to notify you about that. Initialization Flow Provide conceptual Introduce of the application, including “Sync”, ”My Memo”, “My Body”, and “My Helper”. z Sync Display syncing concept.
z My Memo Display My Memo concept. z My Body Display My Body concept.
User Manual Tapping “?” in the main page will direct you to “User Manual” page in which you can find the detail regarding My Body, My Memo, My Helper and My Settings.
My settings This page shows you the basic settings and status about your smart watch.
To set your time and update your data, click the icon in this field to synchronize your smart watch with your tablet immediately. Then, on your smart watch, a Bluetooth icon appears in the bottom right corner of the display as shown on the left. My watch info It shows you the current memo usage and power status: z Memo usage: it shows the estimated remaining space for notification events.
Only today and the day after today’s memos will be synchronized to your wearable device. z Watch battery: it shows the estimated remaining power. For example, if it shows “96hr”, it means your wearable device can still run for about 96 hrs. By clicking this icon, you can view the detailed information of your wearable device, including Bluetooth device name, Bluetooth MAC, Serial number, and Build number.
Mode You can select the modes that you want to view on your smart watch. The modes available here are: Time Pedometer Calorie Distance In default, the selected modes are Time” and “Pedometer”. You can switch these two display modes by double‐taps the display of your smart watch, as shown below.
To add modes, just click on your desired mode icons. For example, if you want to add the Calorie mode or/and Distance mode, do the following: 1. Click the mode icon or/and . 2. The mode field will reflect your selection. 3. After your smart watch is synchronized with your student watch, you can now double‐tap the watch to switch between your desired modes.
Here you can click one of the hand icons to choose on which hand you will wear your smart watch. The system can adjust its data collection and algorithm based on the settings here. The left hand is selected in default.
4. Battery Charging your battery 1. With the provided magnetic charging cable, connect the pogo connecting head to the pogo connector on the back of your smart watch. 2. Plug the USB head of the charging cable to the provided wall mount charger and plug the charger to a wall socket. 3. After the charging sequence is complete, unplug the pogo connector first before unplug the charger from the wall socket.
Battery alarming When the battery capacity is lower than 20%, if you double tap to wake up your smart watch, it will go into alarm mode and show the alarm as shown below. In the alarm Mode, you can double tap it to switch to the time Mode. Or, after 7 seconds, it will go into the sleep Mode..
7. Specification System Thunderdome platform with Zephyr OS Intel Curie module Quark SE SOC Memory Internal 80kb SRAM Storage Internal total storage 384kB Flash, 80kB SRAM External total storage 4MB Wireless Bluetooth: BLE Radio with BT4.
Notice: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
