FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Information for the OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user. 1) This device is intended for OEM integrators only. 2) Please see the full Grant of Equipment document for other restrictions.
JEM_WLAN 13B130-JU PIFA MAIN for 3G Antenna 9074 SKU 0.47 dBi for 2.4GHz WGT_WLAN 13B130-JU PIFA 6 MAIN for 3G Antenna 9052 SKU Note: The antenna connector is I-PEX type. 2.03 dBi for 2.4GHz 5 3 1.20 dBi for 5 GHz 3.
Motherboard layout Main components No. Name No.
System connectors No. Name No. Name 1 Pen charger CONN 8 LCD Connector 2 5MP camera 9 Battery CONN 3 Lens led 10 NFC CONN 4 1.
I/O Ports and Buttons No. Name No.
Features Processor Intel Bay Trail‐ T 2.4 GHz Quad-core Memory DDR3L-RS, 1333MT/s 2GB only Storage Single eMMC v4.51 Wireless Wi-Fi 802.11 a/b/g/n Bluetooth 4.0 NFC support Resolution: 1366(H) × 3 (RGB) × 768(V) pixels Support 10-points multi-touch Display Cameras Input/Output Speaker Front camera: 1.26 M MIPI-CSI Rear camera: 5.0 M MIPI-CSI Normal non-mirror mode 1 x USB 3.
