User's Manual

SKM-U mPC

1 Remove a blanking plate from the system case corresponding to the slot you are going to

use.

2 Install the edge connector of the add-on card into the expansion slot. Ensure that the edge

connector is correctly seated in the slot.

3 Secure the metal bracket of the card to the system case with a screw.

Follow these instructions to install an add-on card:

Please refer to the following illustrations to install the add-on card:

* For reference only

Insert a WIFI card into the M.2_Wifi Slot.

For some add-on cards, for example graphics adapters and network adapters, you have

to install drivers and software before you can begin using the add-on card.

Insert a SSD card into the M.2_SSD Slot.

* For reference only