User's Manual

SKM-U mPC

3. Installing Hardware

• This motherboard accommodates two memory module. It can support two 204-pin DDR4

DIMM 2133 MHz.

• Do not remove any memory module from its antistatic packaging until you are ready to

install it on the motherboard. Handle the modules only by their edges. Do not touch the

components or metal parts. Always wear a grounding strap when you handle the modules.

• You must install one module in the slot. Total memory capacity is 32 GB.

• Refer to the following to install the memory modules.

Install the DIMM module into the slot and press it firmly down until it fits in place. Check that the

cutouts on the DIMM module edge connector match the notches in the DIMM slot.

3-1. Installing Memory Modules