User's Manual

[鍵入文字]
System Installation
Before installation, several items shall be prepared:
 A USB CD-ROM Drive
 ElitePad S10 Drivers CD
 Windows 7 Installation CD
Installing Windows 7
 Connect USB Drive to the USB port of the product, and in the mean time connect the
power cord to prevent the power failure while installing.
 After turn on the product, press [ + ] at the same time to enter BIOS mode.
 Long press [ ] and select “Boot”; and then, short press [ ] and down select “Boot
Device Priority”, short press [ ] to enter the feature, as shown below.
 After entering “Boot Device Priority”, short press [ ] and down select “Boot Type
Order”, short press [ ] to enter the feature, as shown below.
 After entering “Boot Type Order”, short press [ ] and select “CD/DVD-ROM Drive”,