User Manual

52
4. Copy the RAID driver into your USB Floppy Disk. Before
installing the WinXP MCE driver, be sure it is pointed to the
right location:
(Driver\SATA_F6\F6flpy32\*.* for WinXP MCE 32bit) or
(Driver\SATA_F6\F6flpy64\*.* for WinXP MCE 64bit)
5. You can also execute directly from the following path:
Driver\SATA_F6\F6flpy32.exe to generate 32 bit Driver to USB
FDD.
or
You can also execute directly from the following path:
Driver\SATA_F6\Fflpy64.exe to generate 64 bit Driver to USB
FDD.
6. Put your floppy disk into the USB FDD drive that contain RAID
driver. (i.e.: Windows setup don’ t support USB disk).
7. Now you can start installing the WinXP MCE in RAID mode.
8. Press the “ F6” key to load the RAID/ACHI Driver