User's Manual Part 2

34ECS SI mPC
This page enables you to set the keyboard NumLock state and devices boot sequence.
5. Boot Menu
This item is used to select the operation system.
Operation System Select (Windows 7 or othe...)
This item enables or disables launch network option ROM.
Launch Network OpROM (Disabled)
This item enables or disables launch storage option ROM.
Launch Storage OpROM (Disabled)
This item enables or disables boot with initialization of a minimal set of device required to launch active
boot option. Has no effect for BBS boot options.
Fast Boot (Disabled)
This item enables you to select Numlock state.
Bootup Numlock State (On)
This item enables or disables quiet boot.
Quiet Boot (Disabled)
Use this item to select boot mode.
Boot Mode Select (LEGACY)
These items show the boot priorities.
Boot Option #1 /2 /3 /4 /5 /6 /7
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Boot
Boot Configuration
Operation System Select [Windows 7 or othe...]
Launch Network OpROM [Disabled]
Launch Storage OpROM [Disabled]
Fast Boot [Disabled]
Bootup NumLock State [On]
Quiet Boot [Disabled]
Boot Mode Select [LEGACY]
Set Boot Priority
Boot Option #1 [Hard Disk]
Boot Option #2 [CD/DVD]
Boot Option #3 [USB/Floppy]
Boot Option #4 [USB CD/DVD]
Boot Option #5 [USB Hard Disk]
Boot Option #6 [USB Flash]
Boot Option #7 [Network]
Windows 7 or other OS:
Boot policy for Legacy OS
Windows 8.x: Boot policy
for UEFI OS without
Compatibility Support
Module (CSM)
Windows 8.x with CSM:
Boot policy for Windows
8.x with Compatibility
Support Module (CSM)
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
: Select Screen
: Select Item
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.