User's Manual Part 2

This item shows the processor speed.

CPU Speed (2.16 GHz)

This item shows the computer supports 64-bit.

64-bit (Supported)

Use this item to show the mode of Serial ATA configuration options.

SATA Configuration

Advanced

SATA Configuration

SATA Mode [AHCI Mode]

mSATA Port Not Present

SATA Port Not Present

Select IDE / AHCI

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

: Select Screen

: Select Item

Use this item to select SATA mode.

SATA Mode (AHCI Mode)

This motherboard supports one mSATA and one SATA channel, and each channel allows one mSATA

/SATA device to be installed. Use these items to configure each device on the mSATA/SATA channel.

mSATA/SATA Port (Not Present)

Press <Esc> to return to the Advanced Menu page.

Use this item to enable or disable the maximum CPUID value limit, you can enable this item to

prevent the system from “rebooting ” when trying to install Windows NT 4.0.

Limit CPUID Maximum (Disabled)

This item allows the processor to classify ares in memory by where application code can execute

and where it cannot. When a malicious worm attempts to insert code in the buffer, the processor

disables code execution, preventing damage or worm propagation. Replacing older computers with

Execute Disable Bit enabled systems can halt worm attacks, reducing the need for virus related

repair.

Execute Disable Bit (Enabled)

When disabled, a VMM cannot utilize the additional hardware capabilities provided by Vandor Pool

Technology.

Intel Virtualization Technology (Enabled)

Use this item to control the Energy mode of the processor.

Power Technology (Energy Efficient)

ECS SI mPC