User's Manual

3.1 Distribution Description
The operating system of GWB-RFID/GWS-RFID is based on Wind River IDP XT 3.1(RCPL23 or above).
This Linux distribution is based on the Linux 3.4.91 kernel and the GNU 4.6.3 tool chain.
3.2 Powering the System
Connecting the PoE injector, the system will start up automatically.
Figure 1: Location of PoE injector.
NOTE:
You’d better shut down or reboot the system using a console or a secure shell connection (see next
section for login).
— Powering off by disconnecting power cord could cause problems. —
Login as ‘root’ and then issue a ‘poweroff’ or ‘reboot’ command.
root@WR‐IDP‐B072:~#poweroff
root@WR‐IDP‐B072:~#reboot
Or send ssh remote command to gateway
ecs@ecs‐IoT:~$sshroot@192.168.
1
.
1

p
oweroff

root@192.168.1.1'spassword:
ecs@ecs‐IoT:~$
ecs@ecs‐IoT:~$sshroot@192.168.1.1

r
eboot

root@192.168.1.1'spassword:
ecs@ecs‐IoT:~$
13 GWS-RFID RFID Reader