User's Manual Part 2

• Insert the CD-ROM Driver into your CD-ROM/DVD-ROM drive.

• Click “Start” and Select “Run”.

• Type the following: D:\Driver\Audio\Setup.exe (If D is not your CD-ROM/DVD-

ROM drive, substitute D with the correct drive letter).

• Click on “Setup” to begin the Installation Wizard.

• Follow the Wizard’s on-screen instructions to complete the installation.

• Restart the system.

Intalling the IR Driver

To install the audio driver you must first remove the currently installed driver.

• Insert the CD-ROM Driver into your CD-ROM/DVD-ROM drive.

• Click “Start” and Select “Run”.

• Type the following: D:\Driver\IR\Setup.exe (If D is not your CD-ROM/DVD-

ROM drive, substitute D with the correct drive letter).

• Click on “Setup” to begin the Installation Wizard.

• Follow the Wizard’s on-screen instructions to complete the installation.

• Restart the system.

Intalling the LAN Driver

To install the LAN driver you must first remove the currently installed driver.

• Insert the CD-ROM Driver into your CD-ROM/DVD-ROM drive.

• Click “Start” and Select “Run”.

• Type the following: D:\Driver\LAN\Setup.exe (If D is not your CD-ROM/DVD-

ROM drive, substitute D with the correct drive letter).

• Click on “Setup” to begin the Installation Wizard.

• Follow the Wizard’s on-screen instructions to complete the installation.

• Restart the system.