User Manual

25
LOADING A DISC
To play a CD disc, follow the instructions listed below.
1. Push the CD-ROM/DVD-ROM/Combo eject button on the CD
drive door. Gently pull the tray all the way out.
2. Carefully lift the CD-ROM/DVD-ROM/Combo by the edges
and make sure the shiny surface is face down (the side with
no writing on it). Carefully insert the CD-ROM onto the tray.
Push the CD-ROM/DVD-ROM/Combo down gently so that it
snaps onto the center ring.
3. Push the tray back into the drive.
To remove a disk, do the following:
1. Check the LED display and make sure that the computer is not
accessing the CD-ROM/DVD-ROM/Combo drive.
2. Push the eject button and pull the tray all the way out.
3. Carefully pick up the CD disk by the edges and – while
pressing down on the center ring – remove the CD-ROM/DVD-
ROM/Combo from the tray.