User Manual
Table Of Contents
- Conventions of This Manual
- Safety Precautions
- Wichtige Sicherheitshinweise
- Things you must remember before working on your computer
- Let your computer acclimate itself
- Heat, Cold, Humidity, and Glare
- Suitable place to work
- Preparing your Computer
- Knowing your Computer
- Bottom View
- Connecting to a Power Source
- Turning On Your Notebook Computer
- Operating on Battery Power
- Installing and Removing the Battery Pack
- Charging the Battery Pack
- Adjusting the LCD Screen Display
- The Notebook’s Hot Key Controls
- The TouchPad
- Power Saving Modes
- Removing the Battery Pack
- Resetting the System
- Adjusting the Brightness
- Using the Windows
- Control Panel
- Using a modem for Connection to Internet (optional)
- Using a wired LAN for Connection to Internet
- Using Wireless LAN Network for Connection to Internet
- Bluetooth Connection
- Entering the BIOS Setup Screen
- Leaving the BIOS Setup Screen
- BIOS Action Keys
- Modifying the BIOS Settings
- Audio Problems
- Hard Disk Problems
- Display Problems
- Keyboard and Mouse Problems
- CMOS Battery Problem
- Memory Problems
- PC Card Problems
- Performance Problems
- USB2.0 Problems
25
TouchPad Precautions
The TouchPad is a pressure sensitive device. Please take note of
the following precautions.
¾ Make sure the TouchPad does not come into contact with dirt,
liquids or grease.
¾ Do not touch the TouchPad if your fingers are dirty.
¾ Do not rest heavy objects on the TouchPad or the TouchPad
buttons.
You can use the TouchPad with Microsoft Windows as well as non-
Windows applications.
Power Saving Modes
This section contains information on the notebook’s power system,
including the AC Adapter, the battery system, recharging the
battery, and tips for conserving battery power.
The power system is comprised of two parts, the AC Adapter and
the battery system. The AC Adapter converts AC power from a wall
outlet to the DC power required by the computer.
The Battery Power System
Before using the computer on battery power for the first time,
check the battery status icon on the Windows Toolbar to make
sure the battery is fully charged.