User's Manual Part 1



  
Proven Single-Ended BER for faster BER
< 4 sec/per channel for 3G fast verification (BER, RSSI, TX, ILPC)
Tester supported: R&S CMU200, CMW500, and Agilent 8960
 
M.2 modules are marketed for use on Tablet, Ultrabook, and Laptop devices. OEM
vendors routinely offer multiple hardware configurations for the same base model, with
different processor speed, drive type, or display type, etc. Each configuration has a
different Radio Frequency emission profile with the possibility of introducing new
interference sources to a modem module.
The Noise Profiling Tool will measure, record down & plot graph of the RF noise level
present on each RX channel. This SW tool will switch on receiver port and sweep all
applicable RX channels on each band and each technology (WiFi, Bluetooth, GPS, and
GLONASS). This will allow OEM vendors to quickly know the noise jamming profile to the
modem module plugged in their devices.