User's Manual Part 1



  
029 XXIX
1850 MHz
-
1910 MHz
or
1710 MHz -
1755 MHz
716 MHz
-
728 MHz
001 I
1920
MHz
-
1980 MHz
2110 MHz
-
2170 MHz
Table 3. M.2 Module - Data Services
Data Service M.2 module
HN930
LN930-AP
LN930
GPRS Class 33: DL 85.6 kbps, UL 85.6 kbps x - x
EDGE Class 33: DL 236.8 kbps, UL 236.8 kbps x - x
WCDMA: DL 384 kbps, UL 384 kbps
x
x
x
HSPA+: DL 21 Mbps, UL 5.7 Mbps x x x
HSPA+: DL 42 Mbps, UL 5.7 Mbps - x x
LTE FDD: DL: 100 Mbps, UL 50 Mbps - x x
LTE FDD: DL: 150 Mbps, UL 50 Mbps - x x
Module supports DL 150 Mbps in LN930. This is only for generic SW and VZW SW, but not
for AT&T SW.
 
 
The M.2 HSPA+ module is Intel’s Next Generation Form Factor design based on Intel’s
XMM™6260 modem platform. The M.2 HSPA+ card is a dual-mode (UMTS/GSM) 3GPP
release 7 HSPA+ modem.
The M.2 HSPA+ module includes support at the 75 pin application interface for
M.2 Control, USB 2.0 HS, GNSS, and USIM. Antenna Tuning is not supported.
A block diagram of the M.2 HSPA+ module is shown in
Figure 1
.