User's Manual Part 1



  
Table 1 M.2 Module - General Feature
Feature Description Additional Information M.2 module
HN930
LN930-AP
LN930
Mechanical M.2 Card Type 3042
Slot B
30 mm x 42 mm
Pin count: 75
(67 usable, 8 slot)
x x x
Operating
Voltage
3.3 V +/- 5% -
x x x
Operating
Temperature
- – Normal
–
Extended
Extreme - This is the
surrounding air temperature of
the module inside the platform
when the card is fully operating
at worst case condition
x x x
Application
Interface
(75 pin card)
Interprocessor
Communications
USB 2.0 High-speed
x x x
USIM w/ Card Detect SIM_CLK, SIM_RESET,
SIM_IO, SIM_PWR,
SIM_DETECT
x x x
M.2 Control Full_Card_Power_On_Off
x x x
Reset#
x x x
W_DISABLE#
x x x
LED #1
x x x
DPR (Body SAR)
x x x
Wake on WWAN
x x x
GNSS Disable
x x x
Global Positioning
(GPS/ GLONASS)
I2C_SCL, I2C_SDA, I2_IRQ,
CLKOUT, TX_BLANKING
x x x
Antenna Tuning (4) GPO (RF Transceiver)
- x x
RF Coexistence (3) GPIO
- x x
RF Antenna Main & Diversity/ GNSS Separate coax connectors
x x x
Debug JTAG -
x x x
ETM11 -
- x x
MIPI PTI -
- x X