i
Preface Copyright 2004 All Rights Reserved. The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Notices Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Content Chapter 1: Before you Start----------------------------------------------- 1 Conventions of This Manual........................................................................ 1 Safety Precautions ....................................................................................... 1 Wichtige Sicherheitshinweise .................................................................... 3 Things you must remember before working on your computer...............
ATI OpenGL.................................................................................................. 56 ATI’ s Display................................................................................................ 56 Color ............................................................................................................. 58 Options .......................................................................................................... 59 Overlay .........................................
Canadian DOC Notice For Class B Computing Devices This Class B digital apparatus meets all requirements of the Canadian Interference - Causing Equipment Regulations. Cet appareil numerique de la classe B repecte toutes les exigences du Règlement sur le matèriel brouilleur du Canada. Personal Inventory This Notebook computer system is designed for years of productive and pleasurable computing. Use this section to keep notes about details of your purchase. Update this section when you add new options.
BEFORE YOU START Conventions of This Manual Use this manual will help you get the most from your notebook computer. • If you are an experienced user of computers and/or Microsoft’s Windows operating systems, you might find it useful to read the Quick Start Guide that comes along with your accessories. • If you are a less experienced user, you should through the manual carefully before using your system.
8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 2 Place the power cord in such a way that people can not step on it. Do not place anything on top of the power cord. All cautions and warnings on the equipment should be noted. If the equipment is not use for a long time, disconnect the equipment from the main power outlet to avoid being damaged by transient overvoltage. Never pour any liquid into the opening, this could cause fire or electrical shock. Never open the equipment.
All components of the cord set must bear a “PSE” or “ T ” mark and registration number in accordance with the Japanese Dentori Law. Ø The minimum specifications for the flexible cord are .75m ㎡ conductors. C. For Other Countries: Ø The cord set fittings must bear the certification mark of the agency responsible for evaluation in a specific country. Ø The flexible cord must be of a HAR (harmonized) type H05VV-F. Ø The cord set must have a current capacity of a least 2.
4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 4 Versenden Sie Keine Flüssig- oder Aerosolreiniger. Am besten eignet sich ein angefeuchtetes Tuch zur Reinigung. Die Netzanschlußsteckdose soll nahe dem Gerät angebracht und leicht zugänglich sein. Das Gerät ist vor Feuchtigkeit zu schützen. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen oder Fallen könnte Beschädigungen hervorrufen. Beachten Sie beim Anschluß an das Stromnet die Anschlußwerte.
Das Kabel-Set, das an das Netzteil angeschlossen wird, muss den Anforderungen des Landes, in dem Sie das Netzteil einsetzen, genügen, je nachdem, ob die Netzspannung 100-120 oder 200-240V Wechselspannung beträgt. Ø Das Kabel-Set muss für das Land, in dem es eingesetzt wird, zugelassen sein. Ø Der Gerätestecker des Kabels muss in eine CEE22/ EN603/ IEC 320 Buchse passen. A. Für die USA und Kanada: Ø Das Kabel-Set muss UL-gelistet und CSA zertifiziert sein.
• • Benutzen Sie das Telefon nicht um ein Gasleck zu melden, falls es sich in der Nähe des Lecks befindet. Benutzen Sie nur solch ein Stromkabel, wie in dieser Anleitung beschrieben. 19. Benutzen Sie das Netzteil nicht in unmittelbarer Nähe zu Wasser oder anderen Flüssigkeiten. Gießen Sie nie Flüssigkeiten über das Netzteil. 20. Achtung Laser: Laser Produkt der Klasse I. Achtung - Unsichtbarer Laserstrahl, vermeiden Sie Kontakt mit dem Strahl bei offenem Gehäuse. 21.
• Try to avoid the computer components from being destroyed if it is over heated, so try to allow plenty of room for air to circulate around the case. • Do not block the ventilation opening. • Do not place your computer in direct sunlight. Suitable place to work Your computer will run well wherever you’re comfortable but extremes of temperature and humidity can be challenging to your system’s parts.
8
INTRODUCTION Welcome to the Notebook PC Congratulations on your purchase of the Notebook PC. Your Notebook features the latest advances in portable computing technology. The Notebook’ s modular design provides maximum expandability without compromising portability. The high-performance CPU and enhanced IDE hard drive provides you with extra processing power for handling complex graphics and running large programs.
Because the Notebook computer is available in different configurations, some of the features mentioned in this manual might not be included on your computer or may differ slightly. Getting to Know Your Computer Opening the LCD Panel To avoid damage to the display panel: 1. Try not to slam the display upon closing it. 2. Try not to place any object on top when it is closed or open. 3. Be sure the system is turned off or in suspend mode before you close the display panel.
1. 2. LCD Screen System Status Indicator Panel CardReader access Hard Disk access NumLock mode CapsLock mode ScrollLock mode 3. Wireless LAN Switch Button 4. 5. TV Button DVD Button 6. Internet Explorer Button 7.
8. Power/Resume Button 9. Stereo Speakers 10. Keyboard 11. The Built-in Microphone 12. TouchPad 13. TouchPad Buttons The Front Side LED Indicators 1. Power On This LED will light when the system is power on. 2. Suspend This LED will light when the system is in suspend mode. 3. Battery Charge This LED will light when the battery is in charging mode.
The Left Side 1. 2. 3. 4. DC IN Connector The CD-ROM/DVD-ROM or DVD CD-RW Combo PCMCIA CardReader Be sure the face of the card must be facing down when inserting it to the cardreader slot. 5. PCMCIA Eject Button 6.
The Right Side 1. 2. 3. 4. 5. 6. Kensington Lock Ventilation Opening MCE Port External CRT Port S-Video Port Modem Port Always disconnect all telephone lines from the wall outlet before servicing or disassembling this equipment. To reduce the risk of fire use only No. 26 AWG or larger telecommunication line cord.
7. LAN Port When using a LAN, please use an EMI Shielding Cable to minimize an inteference when transmitting. 8. USB Ports 9. Audio Line Out Jack 10. ExternalMicrophone Jack The Rear 1. Cable TV Input Before connecting the cable into the connector, be sure to remove first the cover on the cable TV connector at the rear of the computer with the aid of a screw driver. One more thing that you need to be aware of is to know the video standard being used in your country that you are viewing.
The Bottom Panel 1. 2. 3. 4. 5.
6. 7.
Page intentionally left blank 18
GETTING STARTED Connecting to a Power Source Connecting the AC Adapter A universal AC adapter is provided to supply your computer with power and also charge the computer’ s battery pack. The adapter’ s AC input voltage can range anywhere from 100 to 240 volts, covering the standard voltages available in almost every country. The power cord for the AC adapter requires a three-hole grounded AC outlet. To connect the computer to an external power source: 1.
Do not use inferior extension cords as this may result in damage to your Notebook. The Notebook comes with its own AC adapter. Do not use a different adapter to power the computer and other electrical devices. Whenever possible, keep the AC adapter plugged into the Notebook and an electrical outlet to recharge the battery. Never turn off or reset your Notebook while the hard disk is in use and the HDD status icon is lit; doing so can result in loss or destruction of your data.
Only use batteries that are approved by an authorized dealer for this model only. All batteries are not the same and therefore should not be treated as such. Using the wrong battery could cause serious damage to your computer and yourself through toxic emissions. Inserting and Removing the Battery Pack The battery pack should already be inserted in your Notebook computer when you unpack it.
To remove the battery pack: Charging the Battery Pack The installed battery pack charges automatically any time the computer is connected to the AC adapter and an external power source. If this is your first time to use the battery, be sure to fully discharge the battery and recharged until it is fully charged.
USING THE NOTEBOOK COMPUTER Adjusting the LCD Screen Display The LCD screen display can be adjusted by the following key combinations. KEYS FUNCTIONS [Fn] + [F7] Decreases the brightness level. [Fn] + [F8] Increases the brightness level. [Fn] + [F10] Use this key combination to expand your video screen or toggle to its original size. [Fn] + [F12] This key combination toggles the display between the LCD, CRT, simultaneous LCD/CRT, simultaneous LCD/TV, simultaneous LCD/CRT/TV.
• • • Simultaneous display of the LCD screen and CRT monitor Simultaneous display of the LCD screen and TV screen Simultaneous display of the TV screen, CRT monitor and LCD screen You can switch between these display configurations by pressing the key combination [Fn] + [F12]. For information on connecting an external display, please refer to Chapter Four.
The Notebook’ s Hot Key Controls KEYS FUNCTION(S) Power Button Press this button once to power on or enter the suspend/resume mode. Press this button for more than 4 seconds to power off the system. [Fn] + [F2] This key combination turns on/off the volume. [Fn] + [F3] Decreases the speaker volume. [Fn] + [F4] Increases the speaker volume. [Fn] + [F5] Enable/disable Touch pad [Fn] + [F7] Decreases the brightness level. [Fn] + [F8] Increases the brightness level.
The TouchPad The touchpad is a rectangular electronic panel located just below your keyboard. You can use the static-sensitive panel of the touchpad and slit it to move the cursor. You can use the buttons below the touchpad as left and right mouse buttons. TouchPad Precautions The TouchPad is a pressure sensitive device. Please take note of the following precautions. • Make sure the TouchPad does not come into contact with dirt, liquids or grease. • Do not touch the TouchPad if your fingers are dirty.
• • • The Audio Play feature allows you to play music CDs Front panel load/unload button Supports CD-DA, DVD-ROM mode 1 and mode 2, Multi-Session Photo CD™, CD-I/Video CD (pcs.) • Low power consumption • 12.7mm height Precautions for Handling DVD-ROM/Combo Discs • Always hold the disc by the edges, avoid touching the surface. • Use a clean, dry, cloth to remove dust, smudges, or fingerprints. Wipe from the center outward. • Do not write or place objects on the surface of the disc.
Preparing the Battery Pack for Use Before using the battery pack for the first time, the Smart Battery IC within the battery pack should be calibrated in order to get accurate reporting of remaining battery life status. To calibrate the battery pack follows the instructions below: Insert the battery into the battery compartment and turn on the Notebook. If the battery is completely without power go to the next step. Otherwise, let the battery run down until the battery low-low warning beeps are heard.
Battery Low Warning When the pack initially reaches the “Battery Low” state approximately 7 ~ 10 minutes of the usable battery life is left. You will hear an audible beep signal every 1.5 seconds alerting you to the “Battery Low” status. When the battery power reaches the “Battery Low Low” status the beeping sound will accelerate. Your battery now has 1 ~ 2 minutes of battery charge remaining. You must save your data or connect AC power immediately; otherwise, you may lose your data.
3. 4. 5. 6. Press the [Enter] key and disconnect the AC adapter then press the [Y] key until you hear continuous battery low-low warning beeping sounds. The system will be fully discharge and shutdown completely. Connect the AC adapter and let the battery fully recharge. The “Battery Charge LED” which is located at the left side of the notebook will light indicating it is in charging status. When the battery charge LED turns off will indicate the system is fully charged. Repeat step 1 to 4 once again.
DESKTOP OPERATION This chapter discusses those functions of your notebook that are typical of desktop systems. Audio The Multimedia Sound System The Notebook’ s built-in audio capabilities allow you to take advantage of a wide range of education and entertainment multimedia software. The Notebook is equipped with internal stereo speakers, a microphone, and input audio ports for external audio units. An external microphone can be connected to the microphone jack.
For a high-quality sound, click on the "Volume Control" at the lower right end of your screen. From the Volume Control windows, click on the "Advanced" tab, click and select the "Microphone Boost" item. Playing Sound Files Your notebook can play audio files stored in MIDI, WAVE or MP3 file format. Check the Help and Support Center in Windows for information on the functions of the Media Player.
33
Page intentionally left blank 34
INTERNET CONNECTION There are numerous ways to connect to the Internet. This may vary from the user’ s working environment as well as system specifications. • Using a modem and a telephone line • Using a wired LAN • Using a wireless LAN (Optional) Using a modem for Connection to Internet • Use a telephone line to connect to the modem port of your computer. Do not use a digital telephone line.
the “Local Area Connection”. 4. Select “Properties” from the popup menu that appears 5. In the “This connection uses the following items” field, select “Internet Protocol (TCP/IP), and click “Properties”. 6. Enter the system’ s IP and DNS server addresses on the General tab of the “Internet Protocol (TCP/IP) Properties” window. If DHCP is used, click “Obtain an IP address automatically” and “Obtain DNS server address automatically” on the General tab. 7.
without reconfiguring. 1. Follow the steps mentioned when you are using wired LAN connection from 1 to 7. 2. Click on the “User configured” and enter the appropriate values in the “Alternate Configuration” tab. 3. When you have completed the entire configuration, click “OK”.
Using Wireless LAN Network for Connection to Internet (Microsoft’s Service Pack 2) (Optional) 38
CONFIGURING AND MAINTAINING YOUR SYSTEM Introduction The BIOS (Basic Input and Output System) Setup program is a menu driven utility that enables you to make changes to the system configuration and tailor your system to reflect installed hardware or alter system performance. When the Notebook is turned back on, the system is configured with the values stored in CMOS.
The Menu Bar The top of the screen has a menu bar with the following selections: • Main - Use this menu to make changes to the basic system configuration. • Advanced - Use this menu to enable and make changes to the advanced features available on your system. • Security - Use this menu to set a password. The password allows boot up and controls access to the BIOS setup menu.
Legend Key Alternate Key Function Minus key (-) Scrolls backward through the values for the highlighted field. Plus key (+) Scrolls forward through the values for the highlighted field. Home PgUp Moves the cursor to the field at the top of the window. End PgDn Moves the cursor to the field at the bottom of the window. F9 Sets the parameters for the current menu to their default values. F10 Save and Exit. Enter Will select a sub menu or show a range of options for a field.
The Main Menu When the Setup program is accessed, the following screen appears: 42
The Advanced Menu Selecting Advanced from the menu bar displays the advanced menu: If your system support InterVideo application, select the “InterVideo” item from the “Shortcut Key Working With” selection menu. If your system supports the WinXP MCE application, select the “WinXP MCE” item from the “Shortcut Key Working With” selection menu. If your system supports the CyberLink application, select the “CyberLink” item from the “Shortcut Key Working With” selection menu.
The Security Menu The Notebook’ s advanced system of security allows you to set a password to prevent unauthorized access to system resources, data, and the BIOS Setup Program.
The Boot Menu The Boot menu allows the user to specify the order in which the Notebook is to check for a device to boot the system. You can also configure the way that the system will boot up. To make changes, select Boot from the menu bar. The following screen appears: Use the up and down arrows to select the boot device. Then press either the plus key [+] to move the device up the list or the minus key [-] to move the device down the list.
The Exit Menu Once you have made all of your selections from the various menus in the Setup program, you should save your changes and exit Setup.
MICROSOFT CENTER EDITION (MCE) (OPTION) Windows XP Media Center Edition (MCE) The Windows MCE is a complete software for home PC operating system for you to enjoy entertainment choices together in one place easily accessible from anywhere in the room. This will benefits the consumers to enjoy Media Center experience in their own living room. For more information on the function of the MCE, please refer to the Microsoft’ s Windows XP MCE user’ s guide that goes along with your software package.
Please be advice that when you received your computer, the MCE port at the right side. MCE Application Sound Adjustment This notice only applies to those systems that only support MCE application when you are using the Windows volume adjustment function. From your Windows, click on the lower left corner of the screen the speaker icon and open the Volume Control Properties Window. If you are using MCE’s “My TV” application 2.
5. From the “Properties” display window, enable the “Aux” item and click “OK”. The “Aux” is now added on the “Volume Control” window. 6. Enable the “Mute” tab on the “Aux” item and close the window. 4. If you are using InterVideo’s WinDVR application The procedures are almost the same as those mentioned above from steps 1 to 5 to adjust the volume control. On step 6, disable the “Mute” tab on the “Aux” item and close the window.
Page intentionally left blank 50
VGA UTILITIES After you have restarted Windows, open the “Control Panel” and double click on the “Display” icon. From the “Display Properties” window, select the “Settings” tab and click on the “Advanced” tab to enter the “(Multiple Monitors) on ATi MOBILITY RADEON X700 Series Properties" window.
ATI OpenGL ATI’s Display The ATI’ s Display driver allows three simultaneous outputs to LCD, CRT, LCD/CRT, TV/LCD, LCD/TV and CRT. Before proceeding, be sure the monitor is connected to the computer. User can also use hotkeys by typing the name that corresponds with the combinations mentioned above.
53
Color You can adjust the right resolution for your screen display.
Options Display all the items concerning the ATI related function.
Overlay 56
ATI PowerPlay 57
Direct 3D 58
VIEWING LIVE VIDEO (OPTION) The Utility allows you to access the entire range of display controls and configuration options. Its live video can co-exist with other applications running at the time. In addition, you have the choice of keeping the default video window size, scaling it to any other size or using the entire screen for video display.
Using the Remote Control The Remote Control comes with three multimedia softwares: WinDVR, WinDVD, and WinRip. These softwares use only one remote control; the function of each buttons will vary on different software. • DVR Mode Button - Press the DVR button if you want to use the WinDVR software. “ WinDVR” gives you high-quality digital recording of your favorite TV shows on your PC. • DVD Mode Button - Press the DVD button if you want to use the WinDVD software.
Defining the Video Source Select the PAL, NTSC or SECAM, depending on which standard the selected source is using. The factory default is the standard used by your purchase country, and normally there is no need to change this setting. If you are working outside your country, you are required to adjust the setting of our video source. From the WinDVR window, click on your mouse right button and select the “Setup” item.
Application buttons in DVR mode Ø TV - Launch the WinDVR application Ø Channel Surfing - Surf channels by displaying 16 channels at once. Ø Full screen - Change display size to full screen. Ø Mute - Mute or restore sound when watching TV. Ø C.C. (Close Caption) - Display overlay text caption. Ø MTS/SAP - Switch TV sound mode to mono stereo or SAP Ø Scan (Auto scan) - Scans all available channels for context. Ø Arrow Up and Down - Navigates up or down. Ø Arrow Left and Right - Navigates left or right.
Ø CH Up & Down - Selects next higher or lower channel in channel memory. Ø Replay – Playback previous sequel after pressing the TimeShift. Ø Skip - Skip the recorded program. Ø Volume (Volume up and down) Increase and decrease sound. Ø Stop - Stops functions such as record, play, rewind, forward and pause. Ø Play/Pause - Plays or pauses a scene. Ø Record - Records TV and encodes it into MPEG I/II format. Ø TimeShift - Pauses live TV. Ø Real Screen (Go Live) – Stop timeshift.
Application buttons in DVD mode Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø 64 DVD - Launch the WinDVD application. Audio Selection - Selects a language. Subtitle - Activates language subtitles. Full screen - Change display size to full screen. Angle (Angle Selection) - Allows multiple angle viewing Mute - Mute or restore sound when watching CD title or MPEG file. Arrow Up and Down - Navigates up or down. Arrow Left and Right - Navigates left or right. Cancel - Cancel last operation. Select - Selection.
Please take note that when you are playing the DVD applicaton, you will only be able to use the Remote Control DVD button if your system support the InterVideo WinCinema application.If your system support the WinXPMCE application, you will have to use the “Microsoft Remote Control” that comes with your package. Use Lunch key to chosoe between these two applications, please proceed to BIOS Setup and select the “Advanced” menu.
Click on the “Displays” tab to set the monitor or TV or LCD as your “Primary” display device to play the DVD files. The VGA driver default value set the LCD as Primary display device. If the LCD is set as “Primary” display therefore the video image will not display on the monitor or TV. However, if you wish to have the video image display on your external display devices, set the monitor or TV as your “Primary” display device.
Application buttons in Music mode Ø Music - Launch the WinRIP application. Ø DSP Toggle – Let you enable or disable the DSP window when the WinRIP application is launched. Ø Mute - Mute or restore sound when playing music. Ø Arrow Up and Down - Navigates up or down. Ø Arrow Left and Right - Navigates left or right. Ø Cancel - Cancel last operation. Ø Select - Selection. Ø Track (Previous & Next) - Plays previous or next track in the list. Ø Volume (Volume up and down) Increase and decrease sound.
68
T ROUBLESHOOTING This chapter describes locating and solving problems that you may encounter while using your computer. Locating a Problem Problems with your computer can be caused by something as minor as an unplugged power cord – or as major as a damaged hard disk. The information in this chapter is designed to help you find and solve minor problems.
1. 2. 3. 4. If you have been using battery power, connect the Notebook to an external power source and make sure that the battery has a charge. If you are using the Notebook with the AC adapter, check the power outlet, the power cord, and any power switches that may affect your computer. • Check the wall outlet or power strip with an item that you know is functioning properly. A lamp or radio is a convenient item for checking the power.
software, or the Basic Input/Output System (BIOS). These critical malfunctions prevent the computer from operating at all or could cause incorrect and apparent results. An example of a critical error is microprocessor malfunction. • Messages that furnish important information on the power-on and boot processes (such as memory status). These non-critical malfunctions are those that cause incorrect results that may not be readily apparent. An example of a non-critical error would be a memory chip failure.
be depleted. Contact your dealer to change the battery. Problem: You hear irregular beeps during operation of the Notebook and the system halts. Solution: The problem is beyond the scope of this manual. Contact technical support. Problem: An unidentified message is displayed. Solution: Reboot the computer and run the BIOS system setup. Confirm the Setup parameters. If the same message is displayed after booting up again, contact technical support for assistance.
• • • peripheral devices you are using. What messages, if any, are on the screen? What software were you running at the time? What have you done already to try to solve the problem? If you have overlooked a step, your dealer may be able to solve the problem over the phone.
Page intentionally left blank 74
HOW DO I EXPAND MY NOTEBOOK Turn off the computer; disconnect the AC adapter and all peripherals. With your computer turning upside down, remove all the screws that are encircled and shown on the illustration.
Upgrading your Memory 1. 2. 3. 4. 5. 76 If you need to install a higher capacity module, gently push the edge clips on both sides to release the module. Angle the card slightly upward and gently slide it from its edge connector slot. Store the card in the anti-static bag that contains your new module(s). To install the new memory card, hold the card with its gold edge connector toward the edge connector slot of the compartment.
Easy to Upgrade HDD Module The hard drive in your notebook computer is made to be easily swapped out for upgrading. How to Remove your Hard Drive 1. Remove the screw that secure the compartment cover and set them in a safe place. 2. Remove the HDD cover from the compartment. 3. The drive is attached to a special bracket that secures it to the notebook computer. 4. Gently hold the grip of the HDD, Πlift it up to release from its compartment. 5.
How to install your New Hard Drive 1. You will need to align the tabs on the drive bracket with the slots on the bay. 2. Press down gently on the drive bracket until it engages with the system. Do not force the drive into place this can bend the pins on the hard drive. 3. Secure the cover with the screw.
SPECIFICATION Detailed Notebook Specifications Core Logic • • • • • • Intel® Pentium® M processor Dothan 1.86GHz 478pin mFCPGA package Microsoft® Windows ® XP Professional Edition Microsoft® Windows ® XP Home Edition Microsoft® Windows ® XP Media Center Edition Intel® 915PM (Alviso)+ ICH6-M Memory • 512MBx2 LCD Display • Video & Graphics • Hard Drive • Optical Drive • 15.
AV Feature Built-in • TV Tuner • • Remote Control • Pointing Device • • Application Launch Key • LED Status Indicator • Keyboard • Interface Ports • • • PCMCIA • Audio • • AC Adapter Battery • • • Battery Charge • • Battery Life • BIOS • 82 Mini PCI TV Tuner w/ Coaxial connector, support PAL, NTSC, SECAM Support capture function to record the TV programs into Hard Disk Multi-function remote control to enjoy TV program Power on the system, Play TV, DVD play, Music Synaptics touchpad with 4
Card Reader • Communication • • • • • USB Disk 4 in 1 Card Reader (SD/MS/MS Pro/MMC card) 10/100/1000Mbps Gigabit Ethernet on board Intel® PRO/Wireless 2200BG (802.11b/g) network connection TV-Turner Mini-PCI interface, support PAL/NTSC (optional) MDC combo: V9.0/9.2 56Kbps Fax/Modem Web CAM/CMOS sensor, 0.3 Mega pixel resolution CMOS image (optional) Four USB2.0 ports, up to 480Mbit/s USB Connector • Power Management • ACPI 2.
Spec subject to change without notice Battery life will vary depending on your specific hardware and software configuration Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
