Product data

electric gate operators
section 02829
manufactured exclusively for use with the Power Wheel.
5. Hardware: Chamberlain / LiftMaster VTRACK V-Track; 10 ft (3048 mm) length by 4
inch (102 mm) width; unpainted, 12 gauge hot-dipped galvanized steel construction;
single piece design, 90 degree rounded angle top; multiple anchoring holes for ease of
installation.
6. Mounting: Chamberlain / LiftMaster Elite Series MG1300 Magnetic Lock; provides
added security for a gate as it automatically locks and unlocks as the gate is activated
to open and close. 12 VDC power input; 1,300 lb (589 kg) holding force. Includes
transformer, junction box with knockouts, pivoting armature, mounting plate and
hardware.
a. Provide Q240MAU relay module.
b. Provide Q400MAU relay module.
c. Provide 912B relay module.
7. Heater: Chamberlain / LiftMaster 6532449 Thermostat Control Heater, Fin Type;
designed to automatically maintain a suitable temperature inside a control enclosure
down to -40 degrees F (-40 degrees C). Adjustable from 30 degrees to 120 degrees F (0
degrees to 50 degrees C). Used on operators 115V and 575V.
8. Heater: Chamberlain / LiftMaster 6532448 Thermostat Control Heater, Fin Type;
designed to automatically maintain a suitable temperature inside a control enclosure
down to -40 degrees F (-40 degrees C). Adjustable from 30 degrees to 120 degrees F (0
degrees to 50 degrees C). Used on operators 208V - 460V.
9. Pedestals: PED42 Pedestal; 42 inches (1067 mm) high; mounts to pre-existing concrete
pad; 11 gauge steel construction; power coated black; 2 inch x 2 inch (51 mm x 51 mm)
square post; faceplate with universal hole pattern. Includes hardware.
10. Pedestals: PED4272 Dual height Pedestal; 42 and 72 inches high; mounts to pre-
existing concrete pad; 11 gauge steel construction; power coated black; 2 inch x 2 inch
(51 mm x 51 mm) square post; faceplate with universal hole pattern. Includes hardware.
11. Emergency: Chamberlain / LiftMaster ACP17 Fire Access Box.
B. UL Classification:
1. Conforms to Class I, when tested in accordance with UL325
2. Conforms to Class II, when tested in accordance with UL325.
3. Conforms to Class III, when tested in accordance with UL325.
4. Conforms to Class IV, when tested in accordance with UL325.
C. Operator Enclosure: Weather-resistant, hinged, lockable, 16-gauge steel enclosure with
baked-on powdercoat nish over a 7 gauge steel frame.
D. Operator Motor:
1. 1/2 HP Continuous Duty motor with built-in overload protection for gates up to 1200 lbs.
(544 kg) and 40 ft. (12 m) overhead or 25 ft. (8 m) cantilever in length.
a. 115 VAC 60 Hz Single Phase operation.
b. 208 VAC 60 Hz Single Phase operation.
c. 230 VAC 60 Hz Single Phase operation.
d. 208 VAC 60 Hz Three Phase operation.
e. 230 VAC 60 Hz Three Phase operation.
f. 460 VAC 60 Hz Three Phase operation.