Product data

electric gate operators
section 02829
security for a gate as it automatically locks and unlocks as the gate is activated to open
and close. 12 VDC power input; 1,300 lb (589 kg) holding force. Includes transformer,
junction box with knockouts, pivoting armature, mounting plate and hardware. Provide
Q400MAU relay module.
5. Heater: Chamberlain / LiftMaster G6518CSW Self-regulating Heater Coil; keeps
operator gearbox and batteries at suitable temperature when outside temperature is
below 0 degrees F (-18 degrees C) for extended periods of time. Installs into the frame of
the operator.
6. Pedestals: MPEL PED42 Pedestal; 6 inches42 inches (1067 mm) high; mounts to pre-
existing concrete pad; 11 gauge steel construction; power coated black; 2 inch x 2 inch
(51 mm x 51 mm) square post; faceplate with universal hole pattern. Includes hardware.
7. Pedestals: PED4272 Dual height Pedestal; 42 and 72 inches high; mounts to pre-
existing concrete pad; 11 gauge steel construction; power coated black; 2 inch x 2 inch
(51 mm x 51 mm) square post; faceplate with universal hole pattern. Includes hardware.
E. UL Classification:
1. Conforms to Class I, when tested in accordance with UL325
2. Conforms to Class II, when tested in accordance with UL325.
3. Conforms to Class III, when tested in accordance with UL325.
4. Conforms to Class IV, when tested in accordance with UL325.
F. Chassis: 1/4 inch (6 mm) gold zinc-plated steel chassis.
G. Operator Enclosure:
1. High density polyethylene plastic.
2. 16-gauge stainless steel.
H. Operator Motor:
1. One 1/2 HP, 4 amp, instant-reversing 120 VAC motor with electrical limit switch system
capable of 75 cycles per hour; left- or right-hand mounting.
2. Two 1/2 hp, 4 amp, instant-reversing 120 VAC motors (one for open, one for close) with
electrical limit switch system capable of continuous cycles; left- or right-hand mounting.
3. Two 1/2 hp gate motors (one for open, one for close) capable of 60 cycles per hour with
electrical limit switch system and generating 250 lbs. of pulling torque; left- or right-hand
mounting.
I. Gear Reduction: 30:1 gear reduction using worm-gear in synthetic oil bath.
J. Control Circuit: Microprocessor electronics and solid-state control board in a weatherproof
housing; low-voltage control inputs to provide for connection of a full range of optional external
devices including safety loop, exit loop, photocell sensors, telephone entry access systems,
computer attachment, keyed manual disconnect switch operation (to provide release and
manual operation of the gate in emergency situations), re dept. keyed manual disconnect, and
3-button push-button station; provides outputs for sensor alarm, alarm system, and magnetic
locks; provides LED indication of all input and output functions; provides modular plug-in loop
detector technology for safety and exit loops.