Product data
electric gate operators
section 02829
I. Equipment: Provide the following optional equipment.
1. Sequenced Access Management System providing ability to control a slide gate operator
in tandem with a barrier gate operator.
2. Programmable output relay.
3. Radio receivers.
4. Remote controls.
5. Heater kit:
a. 150 watt.
b. 500 watt.
2.7 COMMERCIAL SWING GATE OPERATORS
A. Chamberlain / LiftMaster / Elite CSW200UL High-Traffic Commercial Swing
Gate Operator:
For gates up to 600 lbs. (272 kg) and 18 ft. (5 m) in length with a traveling speed of 13 to 15
seconds for a 90 degree opening.
1. Loop Detector: Chamberlain / LiftMaster Elite Series AELD Loop Detector; plug-
In detector, no wiring needed. 24VDC power input; 2 Relays; 1 Channel; 4 frequency
settings, 2 sensitivity levels with boost feature for high-prole vehicles; designed for and
tested with CSW200UL operators.
2. Hardware: Chamberlain / LiftMaster Elite Series Power Hinge; pair, double 5/8 (16
mm) ball bearings for smooth operation; 3/4 inch (19 mm) solid stainless steel shaft;
continuous cycle operation, self-lubricating/ no grease ttings; unique design so the gate
never hits the post.
a. Powerhinge: For use on steel gates with steel mounting posts; weight capacity
3,000 lb (1361 kg) per pair.
b. Powerhinge2: For use on aluminum gates with steel mounting posts; weight
capacity 1,000 lb (453 kg) per pair.
c. Powerhinge3: For use on aluminum gates with aluminum mounting posts; weight
capacity 1,000 lb (453 kg) per pair.
3. Mounting: Chamberlain / LiftMaster MPEL Mounting Plate; for post mounting. Multiple
mounting options with 3 inch (76 mm) round or 4 inch (102 mm) square posts.
4. Locks: Chamberlain / LiftMaster Elite Series MG1300 Magnetic Lock; provides added
security for a gate as it automatically locks and unlocks as the gate is activated to open
and close. 12 VDC power input; 1,300 lb (589 kg) holding force. Includes transformer,
junction box with knockouts, pivoting armature, mounting plate and hardware. Provide
Q400MAU relay module.
5. Heater: Chamberlain / LiftMaster G6518CSW Self-regulating Heater Coil; keeps
operator gearbox and batteries at suitable temperature when outside temperature is
below 0 degrees F (-18 degrees C) for extended periods of time. Installs into the frame of
the operator.
6. Pedestals: MPEL PED42 Pedestal; 6 inches42 inches (1067 mm) high; mounts to pre-
existing concrete pad; 11 gauge steel construction; power coated black; 2 inch x 2 inch
(51 mm x 51 mm) square post; faceplate with universal hole pattern. Includes hardware.
7. Pedestals: PED4272 Dual height Pedestal; 42 and 72 inches high; mounts to pre-
existing concrete pad; 11 gauge steel construction; power coated black; 2 inch x 2 inch
(51 mm x 51 mm) square post; faceplate with universal hole pattern. Includes hardware.