Product data

electric gate operators
section 02829
a. Powerhinge: For use on steel gates with steel mounting posts; weight capacity
3,000 lb (1361 kg) per pair.
b. Powerhinge2: For use on aluminum gates with steel mounting posts; weight
capacity 1,000 lb (453 kg) per pair.
c. Powerhinge3: For use on aluminum gates with aluminum mounting posts;
weight capacity 1,000 lb (453 kg) per pair.
5. Mounting: Chamberlain / LiftMaster MPEL Mounting Plate; for post mounting. Multiple
mounting options with 3 inch (76 mm) round or 4 inch (102 mm) square posts.
6. Locks: Chamberlain / LiftMaster Elite Series MG1300 Magnetic Lock; provides added
security for a gate as it automatically locks and unlocks as the gate is activated to open
and close. 12 VDC power input; 1,300 lb (589 kg) holding force. Includes transformer,
junction box with knockouts, pivoting armature, mounting plate and hardware. Provide
Q400MAU relay module.
7. Locks: Chamberlain / LiftMaster Elite Series SGLOCK12V Solenoid Lock; provides
added security for a gate as it automatically locks and unlocks as the gate is activated
to open and close. Low power accessory when used with RSLRoboSlide operators;
3,500 lb (1587 kg) holding force. Fail secure feature keeps the unit locked in the case of
a power failure and keyed manual override release for emergencies.
8. Heater: Chamberlain / LiftMaster G6518SL HTRKITRSW Self-regulating Heater Coil;
keeps operator gearbox and batteries at suitable temperature when outside temperature
is below 0 degrees F (-18 degrees C) for extended periods of time. Installs into the frame
of the operator.
9. Pedestals: MPEL PED42 Pedestal; 6 inches42 inches (1067 mm) high; mounts to pre-
existing concrete pad; 11 gauge steel construction; power coated black; 2 inch x 2 inch
(51 mm x 51 mm) square post; faceplate with universal hole pattern. Includes hardware.
10. UL 325 and UL 991 Listed
B. Chassis: 1/8 inch (3 mm) yellow gold zinc dichromate -plated steel chassis.
C. Operator Enclosure: High density polyethylene plastic.
D. Operator Motor: 12V DC motor with plug-in transformer; provides up to 12070 operating
cycles per day.
E. Operator Motor: 12V DC motor provides for varying number of operating cycles per day,
depending on available solar power.
1. Solar Power Supply: “Solar-3” 12V power system.
F. Battery Backup: SlideBarrier gate housing shall contain an integral and internally-mounted
battery backup system to automatically engage in the event of a power loss and auto-reset to
normal operation when power is restored; battery backup shall provide complete operation,
up to 50 cycles, of not only the gate operator, but all DC control devices and sensing devices,
including all sensing loops, to maintain normal operation of the slidebarrier gate system in the
event of a power loss; battery charging shall be accomplished by an integral regulated battery
management system that maintains proper battery levels to insure no disruption in service in
the event of line power failure.
1. Battery: Provide 7-amp 12V DC battery.