Installation Guide

ManualsBrandsElite ManualsBath30 in. x 54 in. x 59 in. 3-Piece Direct-to-Stud Alcove Tub Wall Kit in White

Page 1

305459 Elite™ Wall CS (LESCSxx305459)

305459 Elite™ Nested Wall CS (LESCSNxx305459)

Before installation, peel away protective lm to ensure correct color.

31½"

54"

59"

Back

Panel

Side

Panel

Assembled

53⁄"

1" Nail Flange

28⁄"

1" Nail Flange

51" Door

Opening

Assembled

= stud location

5430 SUGGESTED STUD LAYOUT.

IMPORTANT: Studs highlighted in bold are

required for proper installation.

Fits most standard 54" x 30" bathtubs.

Subject to manufacturing tolerance of [+] or [-] 1/8"

DO NOT RETURN PRODUCT OR CONTACT STORE!

FOR QUESTIONS OR CONCERNS

please call or e-mail our customer support team

8:00am-4:30pm EST. Monday - Friday

1-800-458-9036

lyonssupport@lyonsindustries.com

Summary of content (4 pages)

PAGE 1
DO NOT RETURN PRODUCT OR CONTACT STORE! FOR QUESTIONS OR CONCERNS please call or e-mail our customer support team 8:00am-4:30pm EST. Monday - Friday 1-800-458-9036 lyonssupport@lyonsindustries.com 305459 Elite™ Wall CS (LESCSxx305459) 305459 Elite™ Nested Wall CS (LESCSNxx305459) Before installation, peel away protective film to ensure correct color. Assembled 537⁄8" Assembled 287⁄8" 1" Nail Flange 1" Nail Flange 51" Door Opening Back Panel 59" Side Panel Fits most standard 54" x 30" bathtubs.
PAGE 2
TOOLS YOU WILL NEED Tape Measure Level Drill Pencil Safety Glasses Appropriate Hole or Saber Saw (for Faucet Installation) Caulk Gun 3 Tubes of Adhesive Compatible with Polystyrene Caulk (for Faucet Installation) Screws (Flathead Stainless) 2" Masking Tape Shims INSTALLATION INSTRUCTIONS IMPORTANT • • • • • • Allow panels to reach room temperature before installation. Before you begin determine appropriate product reference (Page 1). Seal strips (included) are required for proper installation.
PAGE 3
INSTALLATION INSTRUCTIONS (continued) MARK TOP OF STUD CENTER ASSEMBLED WALL ON BATHTUB/SEATED BASE STEP 5. INSTALLING SHOWER WALL IN ALCOVE a. Peel back protective film along bottom edge of back and side panels. b. Apply a generous bead of adhesive below mark on each back panel stud only (follow adhesive manufacturer’s recommended instructions). c. Place back panel and center on base or bathtub. d. Apply adhesive to studs for side panel opposite the shower controls and place side panel. e.
PAGE 4
LYONS FIXTURE — LIMITED WARRANTY 5-YEAR CONSUMER, 2-YEAR COMMERCIAL Lyons Industries, Inc. warrants to the original purchaser that this Lyons fixture will be free of manufacturing defects, which affect its performance as a bathing or showering fixture, under the following conditions and subject to the limitations contained in the ”Remedies” and ”Warranty Limitations” sections.