User guide

SENDING/RECEIVING DATA
PAGE 28
Source Codes
UNKN = Unknown
CARD = Card reader module
RCVR = RF module
CODE = Entry code
AUTO = Automatic sensor
CALL = Residence call
DCMD = Direct command
DIR = Directory code
DSC = Door contact sensor
PSTP = Program step
REX = Request to exit input
SCHD = Auto unlock/lock schedule
DOOR = Postal input or door latch
release
PSWD = Enter/exit program mode at unit
Result Codes
INVLD UNKNOWN = Invalid unknown
CLEAR AJAR = Clear door held open alarm
ALARM AJAR = Door held open alarm
CLEAR FORCED = Clear door forced alarm
ALARM FORCED = Door forced alarm
CLEAR STK&OUT = Clear strikes & out alarm
ALARM STK&OUT = Strikes & out alarm
DENIED APBACK = Denied code due to
anti-passback violation
DENIED DND = Denied code due to DND
DENID IN PROG = Denied visitor due to unit in
program mode
DENI AUTO ANS = Denied visitor due to unit in
multi-unit chain auto answers
line
DENI INC RING = Denied visitor due to incoming
ring at unit
DENI IN RTMDM = Denied directory code due to
unit in RMT mode remotely
through Telco side
DENI IN RTLCL = Denied visitor due to
residence in RTM mode
DNI ROFHK NCW = Denied visitor due to
residence phone off-hook and
call waiting is disabled
DNI ROFHK RTM = Denied visitor, residence off-
hook and in RTM mode
DNI RES OFFHK = Denied visitor, residence
off-hook and in RTM mode
DNI MU PROGM = Denied code, unit in multi-unit
chain is in program mode
DENID VIS HNG = Visitor canceled call
DENID RES HNG = Residence hung up on
visitor call
DENI TNAT HNG = Directory call to tenant hung up
on visitor call
DENI RING EXP = Visitor call rings exceeded
DENIED INACTV = Denied code, code is inactive
DENIED INVRF = Denied unknown transmitter
presented at unit
DENIED INVCDE = Denied unknown entry code
presented to unit
DENIED INVCRD = Denied unknown card
presented to unit
DNI INVCRDTPE = Denied invalid card type
presented to unit
DENIED TALKTM = Talk time expired for call
DENIED TMZONE = Denied code due to time zone
LATCH CLOSED = Latch expired
LATCH OPEN = Latch held open
LATCH RELEASE = Latch released
DENIED DR INA = Denied code, door inactive
GRANTED = Granted code access
GRANTED POSTL = Granted access via postal lock
input
GRANTED REX = Granted access via REX input
PS CYCLE RELY = Cycled relay through program
step
SCHED LOCK = Auto schedule has locked
SCHED UNLOCK = Auto schedule has unlocked
DENIED PRGMNG = Denied code due to unit in
program mode
UNIT RESTART = Unit restarted
GRANTED PASSWD = Enter program mode
DENIED PASSWD = Invalid password to enter
programming mode
EXIT PROGMIN = Exiting programming mode