User guide

SENDING/RECEIVING DATA
PAGE 27
REAL-TIME MONITORING AND TRANSACTIONS
Real Time Monitoring
Real Time Monitoring allows you to view the transactions in real time.
1. To open the Real Time Monitoring (RTM) screen, from the main menu select Communications >> Real Time
Monitoring or from the tool bar click the REAL TIME MONITORING icon. This will open the Real Time Monitoring
window.
2. To begin monitoring transactions, click START from the RTM Menu. Each time a transaction is received from the
EL25, the RTM will filter the information and display it on the RTM Grid.
3. To stop the information being updated to the RTM Grid and disconnect, click STOP.
4. To stop the information from being updated to the RTM grid and remain connected, click PAUSE.
5. To reset/clear the RTM Grid, click CLEAR RTM.
6. The Real Time Monitoring window will display a grid that shows the following items:
• Date: Displays the date of the action. Range 01/01/01-12/31/99.
• Time: Displays the time of the action. Range 00:00 - 23:59 (B, C, D, E ...) Example 17:35B, means the
second transaction occurred at 5:35PM.
• Source: Displays where the command came from. See page 24 for descriptions of Source codes.
• Device: Displays which device was used Range 0-4.
• Door: Displays which door was affected. Range 1-4.
• Code: Displays which code was used to activate the door.
• Name: Displays any name associated with the code.
• Result: Displays what action happened (i.e., entry was granted, entry was denied, etc.). See page 28 for
descriptions of Result codes.