User guide

UNIT MANAGEMENT
PAGE 10
(Control Settings Reference Continued)
• Daylight Savings: When enabled, the system will automatically adjust the clock for daylight savings time
(default: Enabled).
• Auto Lock / Unlock Schedules: Enables Auto Lock/Unlock Schedules (a.k.a. Time Zones) for the unit. These
schedules allow you to create time periods to grant or deny access to a building or complex. Assign an
Auto Lock/Unlock Schedule to a door if you want the door to automatically unlock and lock on specific days and
times. For example, you can assign a schedule to a door so that it unlocks at 8AM and locks at 5PM (default:
Enabled). For more information about Time Zones (or other scheduling features) see Times Zones on pages 26-28
of this manual.
• Use Telephone Service: Enable this check box if the unit will use the telephone line. If this feature is disabled, the
unit will ignore its telephone line if it has one and all Telco features (e.g., call forwarding and call waiting) will be
disabled (default: Enabled).
• Direct Commands: With the Direct Command feature enabled, you can perform various functions (e.g., unlock a
door) from your phone. This feature is only available for a single family residence or a manager’s phone sharing a
phone line with the unit (default: Enabled).
• Voice Mail: If there is a voice mail system connected to a resident’s telephone line, the system allows the visitor to
dial an extension during a resident call. To use this feature, the visitor places a resident call, the voice mail system
answers the call, and then the visitor can dial an extension on the unit keypad. If disabled, the visitor will be
prohibited from dialing extensions during a resident call (default: Disabled).
• Enable Call Waiting: If your telephone is in use when the visitor attempts to contact you from the unit, you will
hear 2 short tones to signal that a visitor is attempting to call.You can press “2” on your phone to toggle between
the telephone call and the visitor. This feature is only available for a single-family residence or a manager’s phone
sharing a phone line with the EL25 (default: Enabled).
• Distinctive Ring: Changes how the resident phone rings when a visitor calls. This feature is ONLY available for a
single family residence.
• Ignore Facility Code: When enabled, Versa XS will ignore the facility code of cards and transmitters
(default: Enabled).
• Restore Defaults: Resets the unit settings to their default values.
Tenant Response Keys Reference
The Tenant Response Keys window allows you to define which keys on the EL25 unit will perform which functions from
the tenant/resident telephone.
• Open Door 1: Activates the relay group for Door 1.
• Open Door 2: Activates the relay group for Door 2.
• Open Door 3: Activates the relay group for Door 3.
• Open Door 4: Activates the relay group for Door 4.
• Toggle Call Waiting: Toggles between another
telephone call and the visitor.
• Extend Talk Time: Extends the amount of time you
may talk with a visitor.
• Hang Up: Hang up and deny access to the visitor.