Installation manual

Device Options ([MENU] , [2])
The device options set options that relate to the mode of operation of
the EliteSuite keypad.
To enter the Device Options Menu, press
[MENU] , [2]
To toggle options press the keys [1] to [8] , and the corresponding
Zone LED will be lit when that option is ENABLED.
Pressing the [ENTER] key will save the options.
Option 1 – Slave Keypad
If this option is used, be sure to address the keypad as
slave 1,2,3 or 4.
5 Enabled Slave mode is entered on start up
6 Disabled Master mode is entered on start up
Option 2 to 8 – Reserved
Device Default ([MENU] , [3])
To default all the Device Options, press
[MENU] , [3]
The ARMED LED will now flash, and you must press [ENTER] to
confirm or [MENU] to cancel.
Exiting Device Configuration Mode
Once Device configuration is complete, press the [CLEAR] key to restart
the keypad.
If you do not press any key for 45 seconds while in Device
Configuration mode, the keypad will automatically restart.
12
ELT-KLED EliteSuite Installation Manual