Spectrum/VMAX2/Plus4 Series Electric/Motorized Projection Screen User Guide Rev. 091709-JA www.elitescreens.com info@elitescreens.
Important safety and warning precautions 1. Be sure to read this user guide before use and follow the procedures below. Please retain this manual for future reference. To avoid any damage, do not use in conjunction with any accessories not recommended by the manufacturer. Handle the device carefully during transportation to avoid damage. To ensure safe and reliable operation, direct connection to a properly grounded power source is advised.
Warning Individual modifications to this product are prohibited and will void the warranty. Please contact Elite Screens Customer Service for any questions. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PRE INSTALLATION 1. Carefully unpack the screen 2. Always handle the screen in a leveled position on a clean surface. 3. In order to protect the screen from exposure to stains, keep the screen out of contact with foreign particles such as dust, sawdust, and/or liquids. 1. Select the location for your screen. Ensure that it is within a reasonable proximity from your power source. Be sure to allow for a reasonable angle of projection. 2.
Fig. 1 Optional installation method using a chain to hang the screen from the ceiling Fig. 2 Rev. 091709-JA www.elitescreens.com info@elitescreens.
12-V Trigger The VMAX2 and Spectrum Screens have the capability of using a 12-Volt Trigger. To Projector Red DC12V Green 0V Video Projection Interface 12-Volt Trigger Assembly Diagram A Wa l l-mounted 3-way-switch 1. Bubble Level: Included with the installation package is a small bubble level that can be useful in determining if the screen is perfectly level when installing. Diagram B Infrared “Eye” Sensor with IR Remote Control Bubble Level 2. Below is the RF remote with a range of 100 Ft.
FAQ’S 1. Q: Why does my screen no longer function? A: There are a few possible things you could check: I.) Make sure your wall plug has power and that the screen is properly plugged in. II.) Please check the fuse to y our screen. (Call Tech support for location of fuse) III.) If screen works well with the line switch but not with the remote control, make sure the remote control has good batteries in it. IV.) Our electric screens with a tubular motor installed are equipped with a Thermal relay.
Warranty Policy • Two (2) year warranty on parts and labor from defects in workmanship from purchase date as follows. • Each party will be responsible for one way shipping during the warranty return period. • DOA (Defective on Arrival): Must be reported within 7 business days of receipt. • An RMA (Return Merchandise Authorization) number must be issued in order to process a replacement or authorize a warranty repair.
Register your warranty at www.elitescreens.com/register.html US & Canada Tech Support & Warranty Claim Please contact us at service@elitescreens.com or call +1 877-511-1211 #3 Service Europe Tech Support & Warranty Claim Please contact us at service@elitescreens.eu or call +49-(0) 40-30392958 Asia or China Tech Support & Warranty Claim Please contact us at service@elitescreens.com.cn or call +86-(0) 755-8461-7989 Taiwan Tech Support & Warranty Claim Please contact us at service@elitescreens.com.
