User Guide

Rev. 051117 DR 3 www.elitescreens.com
Pre-Installation
1. Carefully unpack the screen.
2. Always handle the screen in a leveled position on a clean surface.
3. In order to protect the screen from exposure to stains, keep the screen out of contact
with foreign particles such as dust, sawdust, and/or liquids.
NOTE:
Regardless of the mounting method, the screen should be securely supported so that the
vibration or pulling on the viewing surface will not cause the casing to become loose or fall. The
installer must insure that the fasteners used are of adequate strength and suitable for the
installation location.
Accessories for VMAX 2 Series
Please make sure all accessories below are included before proceeding.
Red+ Green-
A. B. C. D.
Infrared Remote Radio Frequency 12 Volt Trigger 3 Way Wall Switch
D. E. F.
Infrared Eye Receiver AAA Batteries Bubble Level