User Guide

Rev.062916-DR www.elitescreens.com

Adjusting the Tension String

There are adjustment knobs located at the end of the weight bar of the screen. If for any reason the tension

string(s) is loose, you can re-tension it by adjusting the tension string(s) knobs. The tension should be equally

balanced in order to provide a flat, uniform projection surface.

Attention: The screen’s tension has been preset to achieve its best performance. The

aforementioned adjustments are typically not required. Prior to making adjustments, please

contact Elite Screens for assistance to avoid damaging the screen and voiding your warranty.

For warranty information, please visit www.elitescreens.com/warranty

For local Elite Screens contact or Technical Support, please visit

www.elitescreens.com

Direction of

wrapping thread:

Adjusting Knob

Adjustment method:

Pull out the

adjusting knob and rotate it to

tighten or loosen tension string. The

direction to tighten/loosen the string

will depend on the direction of the

wrapping thread.

Attention: The string and screen

will lose all tension if the string is

loosened to its maximum. To reverse

this, simply turn the knob in the

opposite direction.