User Guide

Rev.062916-DR
3
-
way Wall
switch
CineTension 2 Series| Controls and Accessories
A. IR Remote
E. IR extended “eye” receiver
F. Wireless 5
mono
Screen operation
Electric Current:
Depending upon region, your Elite Screen will operate on 100v, 110v, or 220v voltage.
1. After ensuring the power
outlet & screen are compatible (
outlet.
2. Once the screen
has power, you’ll be able to control it using any of the 6 methods described below.
6 ways to control your
CineTension 2
1. IR remote control (
Item A, Fig 1
):
The Infrared functions by direct
of sight contact with a beam range of 30 feet. Aim the IR remote at the
circular window located on the left side of the screen
2. IR “Eye” Receiver (Item E, Fig 2
):
directly into the screen’s RJ-
45 input to present a low pr
control option for your IR remote control even in a
installation.
3. RF Remote Control (Item B):
The radio waves eliminate the need for a
direct line of sight with a range of 100 feet.
4. 3-Way Wall Switch (
Item C, Fig
mount control box with an up/stop/down button and plugs directly into the
screen’s RJ-45 input.
Fig.
3
CineTension 2 Series| Controls and Accessories
B. RF Remote C. Wall switch control box
D. 5
F. Wireless 5
-12v (3.5 mm)
mono
trigger cable
G. AAA batteries
Depending upon region, your Elite Screen will operate on 100v, 110v, or 220v voltage.
outlet & screen are compatible (
voltage), plug
the power cord into the power
has power, you’ll be able to control it using any of the 6 methods described below.
CineTension 2
IR “Eye” Receiver
The Infrared functions by direct
line
of sight contact with a beam range of 30 feet. Aim the IR remote at the
circular window located on the left side of the screen
):
The IR “Eye” Receiver plugs
45 input to present a low pr
ofile line-of-sight
control option for your IR remote control even in a
recessed ceiling
The radio waves eliminate the need for a
direct line of sight with a range of 100 feet.
Item C, Fig
3): The 3-way wall switch is a wall
mount control box with an up/stop/down button and plugs directly into the
Fig.
3
www.elitescreens.com
D. 5
-12 volt trigger cable
H. Bubble leveler
Depending upon region, your Elite Screen will operate on 100v, 110v, or 220v voltage.
the power cord into the power
has power, you’ll be able to control it using any of the 6 methods described below.
UP
STOP
DOWN
Fig.1
IR/RF remote
Fig.2