Owner's Manual

Rev. 08/15/17-JA www.elitescreens.com 4
A. Wall Mount
I. Flush mount
1. Determine where the screen will be installed. Then, measure and mark the distance between the top and bottom screw holes
from each bracket.
2. Drill a hole on all marked areas and install the brackets on the wall with the screws. Lift the screen up leveled with the brackets,
slide the screen in the bracket grooves and push until you hear a “click” sound insuring the screen is secure.
3. To remove the screen, hold the screen’s case and press both bracket plates at the same time, then lift the screen.
B. Ceiling Mount
I. Flush ceiling mount
1. Determine where the screen will be installed. Then, measure and mark the distance between the screwholes from each bracket.
2. Drill a hole on all marked areas and install the brackets on the wall with the screws. Lift the screen up leveled with the brackets,
slide the screen in the bracket grooves and push until you hear a “click” sound indicating the screen is secure.
3. To remove the screen, hold the screen’s case and press both bracket plates at the same time, then lift the screen.
II. Suspended
1. Measure and mark the distance between the expansion anchor hooks and drill a hole and install them to the ceiling.
2. Attach the ring to the bracket and secure it with the M6 nut.
3. Hang the screen from the anchor hook or attach the spring snap link to the ring and anchor hook.
4. For high ceiling installation, a chain or steel wire can be used (not included)
C. Hidden Mount
1. Refer to the installation procedures for wall mount or ceiling mount for instructions.
Side view
Ceiling
Screen-to-ceiling installation with brackets
Screen-to-wall installation
Chain not included
(for illustrative purposeonly)
Ceiling
Ceiling