User Guide

V.7/29/15-JA www.elitescreens.com 3
Notice to Installer: Applies only to Starling Tab-Tension 2 with CineGrey 5D
Please use the following installation instructions to obtain optical performance from the CineGrey 5D
Angular Reflective ALR (Ambient Light Rejecting) Screen Material.
Make sure to follow these instructions in order for the CineGrey 5D to perform correctly.
1) Ambient Light must not come from the same direction as the projector’s light
2) Minimum Lens Throw Ratio of 1.5x image width
A. Projector Ceiling Installation: Make sure the projector (light in) is angled (ϴ1) to reflect (ϴ2) at the
mirror-opposite angle (light out) to align with the viewer’s eye level.
Images are not up to scale and are for illustrations purposes only.
B. Projector Table Top: Make sure the projector (light in) is angled (ϴ1) to reflect (ϴ2) at the mirror-
opposite angle (light out) to align with the viewer’s eye level.
Images are not up to scale and are for illustrations purposes only.
Note: Improper installation will result in light loss and produce a dark image. This is due to the
projector’s light reflecting in the wrong direction.