Manual Pull-Down Projection Screen Manual Screen Series User’s Guide 1 Rev.041911‐AS www.elitescreens.com info@elitescreens.
Pre-Installation 1. Carefully unpack the screen. 2. Always handle the screen in a leveled position on a clean surface. 3. In order to protect the screen from exposure to stains, keep the screen out of contact with foreign objects such as dust, saw dust, and/or liquids. NOTE Regardless of the mounting method, the screen should be securely supported so that when retracted, deployed, or even abusive pulling on the screen, the case will not become loose or fall.
Suspended Ceiling using Chains (Hardware not included) You can also hang the screen on a ceiling by using a chain (not included) and hang it by the two loops (models 71‐120) located on each end of the case or by the ears of the end caps (models 135‐170). Screen Operation Note: Always pull the screen down or retract in a 90‐degree vertical angle. To avoid damaging the viewing surface, do not allow the viewing material to touch the screen case when deploying or retracting the unit. 1.
2. To retract the screen back into its case, simply pull the screen down more than 2 inches and let the screen retract by quickly and gently releasing it up. Note: Always release the screen at a 90‐degree angle and do not let go until the screen is entirely inside the case. Keep in mind the screen’s mechanism is new and needs to be deployed/retracted a few times to loosen up. If the screen feels stuck, carefully, with a little force, yank the screen straight down to unlock the unit.
Manual Series Dimension Table Measurements are intended as a reference only and are subject to change without notice. Note: Data Error ±1" 5 Rev.041911‐AS www.elitescreens.com info@elitescreens.
Measurements are intended as a reference only and are subject to change without notice. Note: Data Error ±1" 6 Rev.041911‐AS www.elitescreens.com info@elitescreens.
U Unit: MM 7 Rev.041911‐A AS www.elitescrreens.com info@ @elitescreens.
Warranty Policy • • • • • • • • Two (2) Year parts and labor warranty from defects in workmanship from purchase date as follows (except for refurbished units as specified below). Three (3) Year parts and labor warranty from defects in workmanship for GEMR (Government, Educational, Military, & Religious) purchases of new product only. Refurbished Units carry a 90‐DAY parts and labor warranty. Each party will be responsible for one way shipping during the warranty period.
Contact Info US & Canada Tech Support & Warranty Claim Please contact us at service@elitescreens.com or call +1 877‐511‐1211 #3 or fax +1‐562‐926‐8433 Europe Tech Support & Warranty Claim Please contact us at service@elitescreens.eu or call +49‐(0) 40‐30392958 Asia Tech Support & Warranty Claim Please contact us at service@elitescreens.com.cn or call +86‐(0) 755‐8461‐7989 Taiwan Tech Support & Warranty Claim Please contact us at service@elitescreens.com.
