Safety Information

PRODUCT WHITE PAPER
http://
www.
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
Section 4: Execution
4.1 Pre-Installation

Carefully unpack the screen.

Always handle the screen in a leveled position on a clean surface.
NOTE:
Regardless of mounting
method, the screen should be securely supported so that vibration or even
abusive pulling on the viewing surface will not cause the case to work loose or fall. The installer
must insure that the fasteners used are of adequate strength and suitable for the
chosen.
4.2 Installation
Flush Wall Mounting
1.
Mark the location of where the screen is to
be installed for the pre-
drilled hole.
2.
After marking the area and drilling the hole,
insert the proper screw into
hole and leave about 1/8” of an inch
from the wall to mount the screen.
3.
Mount your screen from the
back of screen’s left and right end cap.
Ceiling Mounting
(additional hardware required)
Optional installation using a ch
ain to hang the screen from
the ceiling.
1. You can also hang the screen on a ceiling by
using a chain (not included) and hang it by the
two loops located on each end of the case.
PRODUCT WHITE PAPER
www.
elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH| Elite Screens India |Elite Screens
China Ltd.
Elite Screens Taiwan Corp |Elite Screens Japan |Elite Screens Australia
Back of end cap
Front view
Carefully unpack the screen.
Always handle the screen in a leveled position on a clean surface.
method, the screen should be securely supported so that vibration or even
abusive pulling on the viewing surface will not cause the case to work loose or fall. The installer
must insure that the fasteners used are of adequate strength and suitable for the
mounting surface
Mark the location of where the screen is to
drilled hole.
After marking the area and drilling the hole,
insert the proper screw into
the drilled
hole and leave about 1/8” of an inch
from the wall to mount the screen.
Mount your screen from the
keyhole located on
back of screen’s left and right end cap.
(additional hardware required)
ain to hang the screen from
1. You can also hang the screen on a ceiling by
using a chain (not included) and hang it by the
two loops located on each end of the case.
China Ltd.
method, the screen should be securely supported so that vibration or even
abusive pulling on the viewing surface will not cause the case to work loose or fall. The installer
mounting surface