Installation guide

Rev012313-JA www.elitescreens.com 4

2. Peel a small portion off of the velvet border and place it about half an inch over the white area of the

screen. Continue to peel off and roll out the remainder of the velvet border until you have reached the

end and cut the edge.

Note: For best results, we recommend cutting the edge in a 45° angle.

3. Repeat the process for the remainder of the sides until all sides are bordered as shown below.

Safety Precautions:

A. Avoid using sharp objects directly on the screen which can result in permanently damaging the

product and voiding your warranty.

B. Creases or wrinkles caused by improper installation are not removable. Handle with care.

For local Elite Screens contact or Technical Support, please visit