Installation guide

ManualsBrandsElite Screens ManualsProjectorsInsta-DE 2

Rev012513-JA 1

Insta-DE 2 Series

Dry-Erase Front Projection Screen Film

Installation Guide

Product Features

 Award winning and GREENGUARD certified VersaWhite material.

 1.1 gain with 180 degree wide viewing angle.

 Special anti-scratch layer to ensure long use as a dry-erase/projection screen.

 Anti-reflection diffusion surface eliminates glare and hot-spot while using a projector.

Application Advantages

 Instantly converts flat surfaces/walls into a dry-erase whiteboard projection screen.

 Includes adhesive black velveteen border to enhance contrast and overall appearance.

 Perfect dry-erase and projection solution for today's short throw projectors.

 Ideal and effective instructional presentation tool in the classroom, boardroom, and

training facilities.

Product specifications

Specifications:

Color display

White

Thickness

2.1mm

Material composition

High molecular weight copolymer of

Terephthalic acid ethyl esters

Weight

/377g

Gain

1.1

Viewing Angle

180∘

Summary of content (4 pages)

PAGE 1
Insta-DE 2 Series Dry-Erase Front Projection Screen Film Installation Guide Product Features     Award winning and GREENGUARD certified VersaWhite material. 1.1 gain with 180 degree wide viewing angle. Special anti-scratch layer to ensure long use as a dry-erase/projection screen. Anti-reflection diffusion surface eliminates glare and hot-spot while using a projector. Application Advantages     Instantly converts flat surfaces/walls into a dry-erase whiteboard projection screen.
PAGE 2
What’s in the package Please make sure all parts listed below are included. a b c d e Parts List QTY a. Insta-DE 2 Screen Material Film Roll b. Self-stick cradle c. Whiteboard pens d. High density eraser e. Microfiber cleaning cloth f. Black velvet border adhesive strip roll 1 1 2 2 1 1 f Notes: For best results and maximum product longevity, ALWAYS and ONLY use a high density whiteboard Eraser. Preparation The Insta-DE 2 product is to be solely installed on flat surfaces.
PAGE 3
ATTENTION: Handle with care to avoid permanent damage to this product 3. Once the edge has been tapped, apply the spray adhesive to both the wall and on the back of the InstaDE2 material. We recommend applying the film in 1 foot increments for best results. 4. Wait until the spray adhesive is dry before attaching the material to the wall. Do not attach the material to the wall if the spray adhesive is still wet.
PAGE 4
2. Peel a small portion off of the velvet border and place it about half an inch over the white area of the screen. Continue to peel off and roll out the remainder of the velvet border until you have reached the end and cut the edge. Note: For best results, we recommend cutting the edge in a 45° angle. 3. Repeat the process for the remainder of the sides until all sides are bordered as shown below. Safety Precautions: A.