Manualshelf

User Guide

ManualsBrandsElite Screens ManualsElectronicsElite Screens Kestrel Series, 84-inch 4:3, Portable Electric Motorized Floor-Rising Projection Projector Screen, FE84V
1234
11/29/2016 www.elitescreens.com 3
Setup:
Remove the IR Receiver from the housing on the left side of
the Kestrel
Floor Electric Screen as
shown in the pictures below.
About the Control System:
1.
Manual Operation Switch:
The left side of the screen's housing includes a UP/STOP/DOWN switch to
raise, lower and stop the screen without the use of the RF/IR remote. See image below for reference.
Please note, the screen power supply switch must be ON for use of this Manual Switch.
2.
RF (Radio Frequency) and IR (Infrared) Remotes:
The Kestrel Series screen includes both IR and
RF receivers that enable the consumer to use either the RF or the IR remote control. The RF remote is
best used when the screen is concealed or long distance control is required. The RF technology therefore
is more versatile as it does not require line of sight to operate the screen.
The IR remote requires a direct line of sight through the screen’s IR receiver.
Up / Stop / Down
IR
receiver