User Manual

Rev.060116-D
4. Insert the threaded rods
(C) through the
hexagonal screws with the
washer
equal to the height of the
screen
that they will hold the weight of the screen.
5. Push the screen up into the
space. Use the
ceiling. The hexagonal screws
place; use the nuts (F
) to ensure a firm connection. Use the
bolts are firmly tightened.
6. Install end flange cover panel
(A
For local Elite Screens contact or Technical Support, please visit
Push
8
(C) through the
M8 expanding bolts and then attach the
M8x40mm
washer
(E). Last put the Hanging Bracket (B)
through the threaded rod
screen
’s housing. Once they are firmly in place
(as shown below)
that they will hold the weight of the screen.
space. Use the
threaded rods (C
) to attach the screen assembly to the
(E
) will connect the screen to the rest of the assembly.
) to ensure a firm connection. Use the
socket wrench (D
) to make sure that
(A) between the gap and the screen
to complete the installation.
For local Elite Screens contact or Technical Support, please visit
www.elitescreens.com
Ceiling
Ceiling
E
and
F
B
C
Push
Push the screen to
the hole of the
ceiling，the
screw across the
hole of the end
cap.
www.elitescreens.com
M8x40mm
through the threaded rod
(as shown below)
make sure
) to attach the screen assembly to the
) will connect the screen to the rest of the assembly.
Once firmly in
) to make sure that
the
to complete the installation.
For local Elite Screens contact or Technical Support, please visit
Socket wrench (H)
C
Use the Socket wrench
to attach the washer
and the outside
hexscrews, and then
adjust the bottom of
the screen to make it
parallel with the
ceiling, and then fasten
the screw.