User Manual

Rev.060116-D
1. Measure and cu
t the ceiling installation slot:
The width should not exceed 10
length of your screen to determine the length.
2.
Drill 4 holes in the ceiling that correspond with the attachments on the various casing sizes.
width should be 120mm
. The length of (A5) in the diagram below
holes located on each ear end of the screen’s case.
3. The M8expanding bolts (G
) mount into thick wood beams, stone or concrete and will support the
screen. Use the
Socket wrench
should be firmly tightened and tested to make sure that they wil
The ceiling wall
Install screw holes
7
t the ceiling installation slot:
The width should not exceed 10
0mm
and not less than the width of the screen’s housing
length of your screen to determine the length.
Drill 4 holes in the ceiling that correspond with the attachments on the various casing sizes.
. The length of (A5) in the diagram below
depicts the distance between the
holes located on each ear end of the screen’s case.
) mount into thick wood beams, stone or concrete and will support the
Socket wrench
(D) to attach the M8x40mm hexagonal screws.
The expanding bolts
should be firmly tightened and tested to make sure that they wil
l hold the weight of the scr
Ceilin
Ceiling Truss
Screen installation slot
10
0
www.elitescreens.com
D
H
G
and not less than the width of the screen’s housing
. Measure the
Drill 4 holes in the ceiling that correspond with the attachments on the various casing sizes.
The
depicts the distance between the
) mount into thick wood beams, stone or concrete and will support the
The expanding bolts
l hold the weight of the scr
een.
70
Ceilin
g
Ceiling Truss