User Guide

Updated 8/11/2014 EA www.elitescreens.com 2
(Image below is of DIY Pro Series- Actual screen appearance will vary based on series and model number)
Tightly fasten the Polypropylene rope throughout each grommet to make the screen flat while
fastening the rope to the installation location. Do several tests to ensure the rope stretches the
material to its maximum extent. Once the approximate length of rope that is needed can be
determined, remove any excess rope by simply cutting it.
Note: Wrap rope with tape before cutting
3. The bungee cord can be attached to each of the four corners of the material and to the support
structure to create a more secure installation while at the same time stretching the material.
When placed at each corner, the elasticity of the cord will tension the screen making it more
flat provide a more uniform surface.
For more information, technical support or your local Elite
Screens contact, please visit www.elitescreens.com
Note: The Screen material is not designed to be left outdoors for an extensive period of
time. Leaving the screen outdoors will result in a reduced lifespan of the screen material. To
prevent damage caused by the outdoor elements, we recommend that you disassemble the
screen after each use and store it indoors.