User Guide

2/3/2016 www.elitescreens.com4



(2) Begin by securing the four corners in the following sequence A→B→C→D (Fig.6).

(3) Insert the fix the plates as shown on Fig. 5. Fix plate ① is about 10cm away from the frame’s corner. Fix

plate ② is about 5cm away. (Fig.7)



(4) Place a fix plate in the center of each side in the following order E→F→G→H.(Fig.9)







(5) Next, fasten a fix plate on the center of each frame side in the following order

I→J→K→L→M→N→O→P as shown in Fig.10.

C

Fig.7

B

(Fig.6)

Tip for attaching the last corner (D):

1. Position yourself left of location ①.

2. Pull the material to the corner of the frame with your hand while your left hand

snaps in the fix plate on location ①(the third red dot).

3. Then insert and snap in the fix plate on location②.

4. Next, move and position yourself on location ③，then pull the edge to the

frame and fasten plates on locations ③and④.

5. Finally, fasten the last fix plate on location⑤. (Fig.8)

①

②

③

⑤

④

Pull

Fig.8

Fig.9

H

F