User Guide

2/3/2016 www.elitescreens.com3


Frame Assembly and Screen Material Installation
1. Insert both Elbow Joints (I) into each Horizontal Curved Frame (P) and join all four frame parts
together as shown below.


2. After making sure that all four corners join at right angles (forming a perfect rectangle), fasten the four
angles together by using M5x15 screws (E).

3. Layout the Screen Material on a clean and dry surface. Then, gently roll out the screen material over the
back of the fixed frame.
4. Attach the fix plates.
(1) Stretch the material to the corner and insert the screen material’s edge in the groove of the frame. While
one hand holds the material in place the other hand snaps in the push plate (Fig.4-Fig.5).






Vertical Upright Fame
Horizontal Curved Frame
Back of the screen material
Minimalgapisnormalhere
(Fig.4)
Insertpushplatein
Screenmaterialedge
(Fig.5)
Schematiccrosssectionoftheframe
Plate
Framegroove