User Guide

Rev.070216-MZ www.elitescreens.com 2
Frame Assembly
1. Insert the center joint into one of the ½ horizontal frames (B) and fasten it with the two M5x15 screws (H).
2. Insert the other ½ horizontal frame piece to the center joint and fasten also using two M5x15 screws.
3. Repeat steps 1 and 2 for assembling the second horizontal frame.
Push
4. Insert and slide in oneM6 screws (G) through the channel located on the back each horizontal frame.
5. Insert the elbow joint (A) into each end of the horizontal frames (B)as shown below.
Horizontal long frame (B)
ElbowJoint
(A)
ElbowJoint
(A)
Horizontal long frame
Place one M6 hex screw (G) in the center for attaching the center support bar (E)
Face up
M6 hex screws (G)
Horizontal frame
Center Joints
Top right Frame
Top left Frame
Note: For models 180” and above, insert and slide in four M6 screws
(two on each frame) through the channel located on the back of each
horizontal frame section (top/bottom). Insert two M6 screws on each
vertical frame section (left/right).
Push