Manualshelf

User Manual

ManualsBrandsElite Screens ManualsElectronicsEdge Free Ambient Light Rejecting Fixed Frame Projection Projector Screen,Aeon CineGrey 3D Series, 120-inch 16:9 for Home Theater, Movie and Office Presentations
12345678910
V072415-EA www.elitescreens.com 7
Screen Material Removal
Follow the steps to properly remove the screen material from the frame. This procedure will ensure prolonging the life
of the screen material.
1. Detach the velcro from the frame.
2. Gently pull back the material to release the material from the velcro connections on the corners
Support bar installation (for models under 180”):
1. Position the center support bar (E) in the middle of the frame and align the hole on each end of the support
bar with the M6 hex screws (G) on the top and bottom frames. Then fasten with the M6x12 screws (I).
Move the M6 hex screw (G) to the middle area of the frames.
Align the M6 screws
with the two holes.
Pull back the screen material from
the velcro connection along the
edges of the frame to detach it.
Support bar