User Manual

V072415-EA www.elitescreens.com 2
Frame Assembly
1. Insert the center joint into one of the ½ horizontal frames (B) and fasten it with the two M5x15 screws (H).
2. Insert the other ½ horizontal frame piece to the center joint and fasten also using two M5x15 screws.
3. Repeat steps 1 and 2 for assembling the second horizontal frame.
Push Push
4. For models 150” and below, insert and slide in one M6 screw (G) through the channel located on the back
each horizontal frame section (top/bottom).
Note: For models 180” and above, insert and slide in four M6 screws (G) through the channel located on the
back of each horizontal frame section (top/bottom). Insert two M6 screws (G) on each vertical frame section
(left/right).
5. Insert the elbow joint (A) into each end of the horizontal frames (B) as shown below.
Horizontal long frame (B)
Elbow Joint (A)
Elbow Joint (A)
Horizontal long frame
Face up
M6 hex screws (G)
Horizontal frame
Center Joints
Top right Frame
Top left Frame
For models 180” and above, insert four M6 hex screws (G) and see page 8 for proper placement.
For models 150” and below, place one M6 hex screw (G) in the center for attaching the center support bar (E).