User Manual

V072415-EA www.elitescreens.com 12

Installation

Locate your desired installation location with a stud finder (recommended) and mark the drill-hole area of where the

screen is to be installed.

1. Drill a hole with the proper bit size according to the wood screws included.

2. Line up the wall brackets with the drilled holes on the installation location and screw them in using a Phillips

screwdriver.

3. Position the frame screen onto the wall brackets (F) as shown in below.

4. The design of the wall brackets allows the frame to slide over them through its sides. This is an important

feature of the installation design as it allows your screen to be properly centered.

For a local Elite Screens contact or Technical Support, please visit