User Manual

V072415-EA www.elitescreens.com 11
3) Make a light mark with a pencil approximately every 8-10 inches apart. This will help guide the way to making a
straight line for the velveteen strip.
4) Repeat steps 2 and 3 on the remaining sides
5) Peel off the backing on the velvet strip and align the top edge at the 10 mm mark.
6) Continue peeling off the backing until the other side has been reached. Make sure that the velvet strip is kept
straight the entire way.
7) Fold back the excess unused velveteen.
8) Repeat steps 5-7 to complete the velveteen strip installation.
Screen Material
Screen Material
10”
10”
10”