Cut Sheet

By Elite Lighting
Due to the changes of constant improvement in LED technology, all details are
subject to change without notice. Consult factory for up to date information.
www.iuseelite.com
OPTICAL SYSTEM
The luminaire provides a Wide (W) distribution and ships standard with
a frosted acrylic lens on a reinforced hinge door to protect the LED light
engines from dust and damage. The LED optic reflector is made of 95%
reflective MIRO-5 aluminum material, engineered to optimize performance
for 93% total fixture efficiency. The individual angled channels of the
reflector help reduce the glare of high angle light emitted by the diodes.
Luminaire available with different shielding options.
MAINTENANCE
The LED engines and driver can be accessed through the bottom by
removing the lamp shields and LED reflector. Angled sides and vents
prevent dust from settling inside and near the LED components, lowering the
required maintenance time. The LED engines and drivers are removeable and
upgradeable even after luminaire installation. Luminaire can be regularly and
safely wiped down to ensure optimal performance.
CONSTRUCTION
Body is constructed of heavy-duty 20-gauge cold rolled steel, post-painted
and engineered for maximum strength and extended life. All corners
interlock to prevent aesthetic damage to the luminaire, with sides and
corners uniformly turned in and hemmed to remove sharp edges for safe
handling and easy installation. Luminaire is supplied with multiple wiring
entrances for easy daisy chain of luminaires, to add power packs, whips, or
other accessories in the field, or for continuous row mounting.
FINISH
Post-painted with a 93% reflective white coat to improve luminaire efficacy,
and all body components are seamlessly interlocked for added structural
strength.
OPTIONS
Luminaires can be shipped pre-installed with whips, modular wiring systems,
daylight harvesting controls, occupancy sensors, and/or power packs for
individual or room control applications.
DRIVER ELECTRICAL INFORMATION
Powered by high-quality constant-current power LED drivers which are rated
for 50 to 60Hz at 120/277V input. Available in 347V., produce less than 20%
THD, and have a power factor of .90 to 1.00.
DIMMING & DRIVER INFORMATION
DIM10 - Flicker Free 1% Dimming Standard (DIM10) 0-10V dimming on either
MVOLT 120, 277 or 347V.
LUT2W - Lutron LTEA2W Hi-Lume 1%. 2-wire LED Driver Forward Phase
Control, 1% dimming in 120V only. Available on all luminaires up to 40 watts.
LUTH - Lutron LDE1 Hi-Lume Eco System. 1% dimming with Soft in Fade to
Black dimming technology.
PELDO10.1 - EldoLED SoloDrive 0-10V. Dimming down to 0.1%. Available on
all luminaires up to 100 watts.
DALI - DALI DT6, DT8 dimming down to 1%. Available on all luminaires up to
100 watts.
ELDODMX - EldoLED PowerDrive dimming down to 0.1%. Available on all
luminaires up to 100 watts.Please see EldoLED website for wiring diagrams
and a list of compatible DMX and DALI control systems.
DIMST-Step Dimming
WARRANTY
Five-year warranty for parts and components. (Labor not included)
LISTING
c-UL-us - Listed for Feed Through Wiring.
Architectural LED High Bay
CB2-LED
SERIES
CB2-Oracle
LED High Bay
Series
Example: CB2-LED-13000L-DIM10-MVOLT-W-40K-85
CB2 LED
LUMENS
13000L
18000L
26000L
38000L
- (13000 lumens)
- (18000 lumens)
- (26000 lumens)
- (38000 lumens)
TYPE
LED
DIMMING
DIM10 - DIM10-MVOLT
OTHER OPTIONS
VHCH
MS
MSPH
GSS
CB2-LED-13000L-WG-WH
CB2-LED-26000L-WG-WH
- V-Hook with chain kit
- Motion Sensor
- Motion Sensor with Photocell
- Gripple Suspension System
- WireGuard for 13000L
- WireGuard for 26000L
*Warranty is contingent on the
correct application and
installation of fixture. Maximum
ambient temperature is 45C
EMERGENCY
O-EMG-LED-10W
O-EMG-LED-20W
CCT
40K
50K
- (4000K)
- (5000K)
OPTICS
W - WIDE
VOLTAGE
MVOLT
CRI
85