Cut Sheet

3’ 140 19”
6’ 35 39”
9’ 15 58”
BEAM DIA. MEASURED AT 50% OF NADIR F.C.
B4IC • B402CL 50W PAR20 FL
4”
Distance to Plane
F(ft)
Initial Nadir
Footcandles E(fc)
Beam
Spread ø(ft)
Sample of Catalog Number: B4IC-AT-W-B401-W-WH
_______ -
AIR-SHUT
________ - ________ - ________ - ________ - ________ - _____________
OPTION TRIM TYPE BAFFLE REFLECTOR TRIM/RING GLASS
Specifications:
B4IC
ITEM SELECTOR: (Please check the boxes below for the option desired)
TYPE AIR-SHUT OPTION TRIM TYPE BAFFLE REFLECTOR TRIM/RING GLASS
B4IC
�
AT
�
(W) With quick connects
�
B401
�
B406
�
AF402
�
W
�
CL
�
WH
�
Green
�
B421
�
B407
�
B471
�
P
�
RG
�
BK
�
Yellow
�
B402
�
B462
�
B472
�
SN
�
W
�
SN
�
Pink
�
B432
�
B452
�
B473
�
CP
�
MB
�
CP
�
Brown
�
B420
�
B455
�
B474
�
BZ
�
BZ
�
CH
�
Navy Blue
�
B496
�
B451
�
B441
�
CP
�
PB
�
Orange
�
B497
�
B454
�
B443
�
SN
�
BZ
�
Blue
�
B403
�
B437
�
B442
�
SHZ
�
White
�
B461
�
B438
�
B444
�
Red
�
B405
�
B439
�
B422
�
AF401
*For custom baffle, reflector, trim ring, glass color and lens options, please consult factory.
BAFFLE
W White
P Black
SN Satin Nickel
CP Copper
BZ Bronze
REFLECTOR
CL Chrome
RG Gold
W White
MB Black
BZ Bronze
CP Copper
SN Satin Nickel
SHZ Satin Haze
TRIM/RING
WH White
BK Black
SN Satin Nickel
CP Copper
CH Chrome
PB Polish Brass
BZ Bronze
B4IC
4"Miniature IC Housing
Submittal form is available @ www.iuseelite.com
Tel: [phone] • Fax: [phone]
Specifications and Dimensions
subject to change without notice.
ELITE LIGHTING-SPEC-06-29-2011
REV:
Project Name:
(1) MAXIMUM 50W R/PAR20/A19
Note:
Type:
Catalog Number:
B
A
C
F
D
E
5-1/2”
(140 mm)
5-1/2”
(140 mm)
4-3/8”
(110 mm)
8”
(204 mm)
12” - 24”
(305 mm - 610 mm)
FEATURES
• Thermally Protected IC housing.
• Designed for accent and task lighting applications.
• Adjustable socket bracket.
• Wire through junction box.
• Preinstalled adjustable bar hanger.
• Dependable, favorable design and effortless
installation.
• 5-½" height allows use in 2" x 6" joist construction.
• Special screw on the frame locks bar hangers in place
which prevents the housing from any movement once
installed.
• Preinstalled socket cap provides electrical contact
protection against dust, paint and over spray.
OPTIONS
AIR-SHUT
• Gasket to prevent air flow from heated or
air conditioned spaces.
• Meets all national air flow requirements.
UL AND C-UL/ETL AND C-ETL LISTED
• For Damp location
• For Feed-through wiring
• For Direct contact with insulation
DESCRIPTION
Small aperture housing designed for new construc-
tion. Thermally protected, IC rated specification grade
recessed housing. Accommodates up to 50W PAR20,
R20, and A19 lamps. Furnished with preinstalled adjust-
able bar hangers. Junction box is provided with four ½"
KOs, one ¾" KO and four Romex knockouts with strain
relief.
SPECIFICATION
A. OUTER HOUSING - Die formed aluminum construc-
tion for maximum heat dissipating air chamber on top of
the housing. Junction box could be accessed from inside
and outside housing.
B. INNER HOUSING - Die-formed, all aluminum con-
struction for maximum heat dissipation and rust protec-
tion. Adjusts vertically in plaster frame to accommodate
½" to 1-3/8" ceilings.
C. SOCKET - Medium base screw shell porcelain socket
preinstalled on adjustable mounting bracket is designed
to allow usage of different lamp types, as well as proper
and consistent lamp positioning.
D. BAR HANGERS - Preinstalled bar hangers allow
housing to be positioned and locked at any point within
a 24" joist span and can be shortened for 12" joists.
They contain a double-headed real nail for secure at-
tachment into the joist. Bar hanger nails are installed
on a 20° downward angle for better contact, and the
90° pivoting mounting plate makes installation fast
and accurate. Bar hangers can fit onto T-Bar spline
with additional slots and holes for special mounting
methods if necessary.
E. JUNCTION BOX - UL and ETL listed for through-
branch circuit wiring and has four ½" KOs, one ¾" KO
and four Romex knockouts with true pry-out slots and
strain clamps.
F. THERMAL PROTECTION - Standard thermal pro-
tection device guards against improper installation,
overlamping and misuse of insulation material.
DESIGNED FOR 2" X 6" JOIST CONSTRUCTION
LAMP WATTAGE:
B4IC