Cut Sheet

By Elite Lighting
Due to the changes of constant improvement in LED technology, all details are
subject to change without notice. Consult factory for up to date information.
www.iuseelite.com
2’ x 4’ Architectural Shallow Plenum Recessed LED Troffer
24-OEVHP-LED
FIXTURE SIZE
24 - 2’ X4’
SERIES
OEVHP -
LED Shallow
Volumetric
Troffer
EMERGENCY
O-EMG-LED-10W
O-EMG-LED-20W
CRI
85
TYPE
LED
LEDOEVHP
24
2’x4’
MAINTENANCE
The center acrylic diffuser can be removed, allowing easy access to LED
boards and driver compartment, locking into place for secure closure of the
luminaire. LED engines and drivers are removable and upgradable even after
luminaire installation. Luminaire can be regularly and safely wiped down to
ensure optimal performance.
OPTICAL SYSTEM
The LED light engine is secured to the body of the luminaire, with the
body acting as a heat sink. A proprietary design of the lens results in zero
pixilation, regardless of the viewing angle, with LEDs placed to promote a
uniform appearance. The result is even illumination across the space, from
luminaire to luminaire.
CONSTRUCTION
Body is constructed of heavy-duty 20-gauge cold rolled steel, post-painted
and engineered for maximum strength and extended life. All corners interlock
to prevent aesthetic damage to the luminaire, with sides and corners
uniformly turned in and hemmed to remove sharp edges for safe handling
and easy installation. Luminaire is supplied with multiple wiring entrances
for easy daisy chain of luminaires, to add power packs, whips, or other
accessories in the field, or for continuous row mounting.
FINISH
Post-painted with a 93% reflective white coat to improve luminaire efficacy,
with all body components seamlessly interlocked for added structural
strength.
MOUNTING
Luminaires accommodate lay-in ceilings, Slot T, and T-bar suspension
systems for 5/8” and 3/8” ceiling thicknesses. Four corner tie points are
standard for safety wire support when required, with built-in earthquake clips,
standard. Luminaires may be available with flange kits, surface mounted kits,
and other options.
OPTIONS
Luminaires can be shipped pre-installed with whips, modular wiring systems,
daylight harvesting controls, occupancy sensors, and/or power packs for
individual or room control applications.
DRIVER ELECTRICAL INFORMATION
Powered by high-quality constant-current power LED drivers which are rated
for 50 to 60Hz at 120/277V input. Available in 347V., produce less than 20%
THD, and have a power factor of .90 to 1.00.
DIMMING & DRIVER INFORMATION
DIM10 - Flicker Free 1% Dimming Standard (DIM10) 0-10V dimming on either
WARRANTY
Five-year warranty for parts and components. (Labor not included)
LISTINGS
c-UL-us - Listed for Feed Through Wiring.
Listed for DLC, California Title 24 compliant.
VOLTAGE
MVOLT
CCT
35K/40K/50K
LUMENS
3000L/4000L/5000L
DIMMING
DIM10 - 0-10V Dimming
Example: 24-OEVHP-LED-3000L/4000L/5000L-DIM10-MVOLT-35K/40K/50K-85
OTHER OPTIONS
24FK
FBF
SBF
RIS
USA
FS-PPV2
FD-301
LMFC-011
FS-205
- 2’x4’ Flange Kit
- Internal Fast Blow Fuse
- Internal Slow Blow Fuse
- Radio Interference
Suppressor
- Made in America
Compliance
- Fixture Sensor Power
Pack
- Low Volatge Daylight
Dimming Photosensor
- Digital Lighting Manager
- Low Voltage Pir Fixture
Integrated Occupancy
Sensor
*FD-301 & FS-205 require FS-PPV2- Power Pack